Ford 8.8 swap into 1st gen Tacoma

I just bought a 1999 Toyota Tacoma base model 2.4l 2wd. I was told it was converted to the ford 8.8 rear end, had a w-58 gear set. I'm having several small problems.
1.) The rear brakes are needing replacing. (They are disc)
2.) The shocks are needing replacing.
3.) I'm having a vacuum leak, I think.
I was wondering if anyone has a diagram of the vacuum system and if anyone has done the ford 8.8 rear-end swap and remember what brake pads and shock length they used on the rear.
I'm new to the Tacoma "game" have owned a 94 4Runner but it was stock so easy to fix. Thanks in advance for any advice.

 

Pictures will help us see what you have

 

1) the brakes really could be anything. I'd be inclined to pull the brake pad and look for a part number.
2) remove an existing shock and see if you can find a manufacturer name or part number.
3) search google for toyota tacoma FSM- you should be able to find the factory service manual in pdf format (alternatively you could also buy it on cd from rock auto). It will have all the details on the vacuum lines. That being said, most folks just get the silicone tubing from Amazon and go to town replacing all of it.

 

The 8.8 is probably from a late 90s explorer. It's a pretty straight forward swap for us 5 lug guys to get a stronger rear and usually LSD. At least it's something to start with.

Good suggestions above about checking for part numbers on the existing parts. Might be the only way to figure out what you have so you can determine what you need!

 

It’s an 8.8 from an explorer. Shocks should be the same, post some pics so we can see what is there right now and we can give you a better answer;

With that being said I’ve been actively looking for an 8.8 to swap into my 5 lug