1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Forgot my @&$:/%<# wallet

Discussion in '2nd Gen. Tacomas (2005-2015)' started by TRDZILA, Feb 21, 2018.

Thread Status:
Not open for further replies.
  1. Feb 21, 2018 at 9:06 PM
    #1
    TRDZILA

    TRDZILA [OP] MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    yep. First day back to work and I forgot my wallet after a week off. I have 6112 upfront on the fourth setting, and 5100 with a 1 inch block and back. I generally don’t get my truck up over 60 mph but I was kinda in a hurry. I push it up to 100 for a while, and it handled perfectly. I removed my swaybar and could not tell a difference on the curves. It stays perfectly planted on the ground, and running two lane roads the roads a little rougher, but not once did I feel nervous over the bumps. Loving the setup.
     
    LarryDangerfield likes this.
  2. Feb 21, 2018 at 10:01 PM
    #2
    desertrunner24

    desertrunner24 Well-Known Member

    Joined:
    Oct 30, 2016
    Member:
    #201101
    Messages:
    3,954
    Gender:
    Male
    First Name:
    Jake
    Fresno , CA
    Vehicle:
    2011 TRD offroad 4x4
    Some
  3. Feb 21, 2018 at 10:17 PM
    #3
    Pigpen

    Pigpen My truck is never clean

    Joined:
    Mar 6, 2012
    Member:
    #74319
    Messages:
    9,201
    Gender:
    Male
    First Name:
    Dan
    Northwest Montana
    Vehicle:
    2012 AC Manual 4.0 4x4 Base Model
    Access cab with child seat in the back, yellow wire mod, diff breather relocated to tail light, engine block heater, Leer topper with Yakima tracks and rack, Yakima rack on cab, Ride Rite air bags with Daystar cradles, CBI hidden front hitch, wired for winch front and rear Warn quick connect, Warn x8000i on external carrier, sway bar delete, trailer plug relocated to under bumper, Pelfreybilt IFS and Mid skids, BAMF Tcase skid, ECGS front diff bushing, ARB CKMA12 compressor, 255/85/16 Backcountry MT 3 load E tires on stock steel rims, Toyo M55 tires (same size) on another set of stock steelies, Up2NoGood heated mirror kit, Husky X-act Contour front floor liners, Northstar AGM 24F battery under the hood, Northstar 27F in the cab, Redarc 25 amp DC to DC charger, Pelfreybilt bolt on sliders with kickout and top plates, TRD Pro headlights, Depo smoked tail lights, Energy suspension body mount bushing kit, OME Dakar leaf packs with AAL, OME rear shocks, OME 90021 front shocks with 885 coils, SPC LR UCAs, Up2NoGood 2wd low range mod, 4 Wheel Campers Grandby slide in camper, 4xinnovations high clearance rear bumper, Uniclutch 800 lb/ft clutch
  4. Feb 21, 2018 at 10:30 PM
    #4
    Speedytech7

    Speedytech7 Toyota Cult Ombudsman

    Joined:
    Feb 20, 2014
    Member:
    #123587
    Messages:
    58,247
    Gender:
    Male
    FCQM+VG Cheney, Washington
    Vehicle:
    96 Turbo Taco V6 405WHP & 482lbft
    It's less Tacoma and more mod
    Uhh, is this like reddit.com/r/subredditsimulator or something. All the words are in english but the order and relevance is unclear. Good to know handling is decent with 6112s though I guess
     
    spartanhockey6, Daria, bski22 and 3 others like this.
  5. Feb 21, 2018 at 10:32 PM
    #5
    tymeson

    tymeson Let's ride

    Joined:
    Jun 25, 2017
    Member:
    #222342
    Messages:
    2,921
    Gender:
    Male
    First Name:
    Steven
    In the desert
    Vehicle:
    03 Gold Prerunner
    Rad man, if I only understood what you said :cookiemonster:
     
    bski22 and Tatts521 like this.
  6. Feb 21, 2018 at 10:40 PM
    #6
    windsor

    windsor Just a guy

    Joined:
    Dec 31, 2014
    Member:
    #145322
    Messages:
    7,681
    Gender:
    Male
    First Name:
    Chris
    Homeless in Oregon
    Vehicle:
    2008 Tacoma Super Duty aka Tundra
    Canopy, fitted seat covers, OBA with self leveling air bags, 100w solar, dual Rhino Rack Pioneer platforms, side & rear LED work/FU lights, CB, cell booster. 7x16 cargo conversion, 3" lift, 7'x6.5' fold down aluminum rear deck.
    How big was the ticket? 100 in a 70?
     
    bski22 likes this.
  7. Feb 22, 2018 at 12:11 AM
    #7
    TRDZILA

    TRDZILA [OP] MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    I don’t know anything about Reddit. I was letting Siri dictate for me, she messed up part of it, I messed up the rest. I removed my swaybar when I installed the 6112’s.
     
    bski22 likes this.
  8. Feb 22, 2018 at 12:14 AM
    #8
    TRDZILA

    TRDZILA [OP] MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    More like 100 in a 55. I take all two lane state highways. Very little traffic at 11 PM.
     
  9. Feb 22, 2018 at 12:15 AM
    #9
    Dalandser

    Dalandser ¡Me Gustan Las Tacos-mas!

    Joined:
    Feb 19, 2015
    Member:
    #149090
    Messages:
    17,642
    First Name:
    Anthony
    Downey
    Vehicle:
    08 PreRunner Regular Cab / 98 4x4 Extra Cab
    Empty Wallet Mod
    I think the mess up was posting about going illegal speeds on public roads on this site... FYI mods no likey.
     
    Last edited: Feb 22, 2018
    ChadsPride and El Duderino like this.
  10. Feb 22, 2018 at 12:17 AM
    #10
    TrdSurgie

    TrdSurgie revised

    Joined:
    Feb 19, 2012
    Member:
    #73132
    Messages:
    4,181
    Gender:
    Male
    Oahu
    Ugh wtf is this trash....
     
  11. Feb 22, 2018 at 1:04 AM
    #11
    tn_popo

    tn_popo OINK

    Joined:
    May 30, 2016
    Member:
    #188252
    Messages:
    1,772
    Gender:
    Male
    First Name:
    Billy
    East Tennessee
    Vehicle:
    '18 Tacoma DCSB TRD Sport V6 Inferno
  12. Feb 22, 2018 at 1:16 AM
    #12
    Plain Jane Taco

    Plain Jane Taco Well-Known Member

    Joined:
    Apr 19, 2009
    Member:
    #16179
    Messages:
    40,279
    Gender:
    Male
    USA
  13. Feb 22, 2018 at 1:27 AM
    #13
    TRDZILA

    TRDZILA [OP] MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Move on if you don’t like it.
     
    b3itz, Shmellmopwho and DustStorm4x4 like this.
  14. Feb 22, 2018 at 1:32 AM
    #14
    Jimmyh

    Jimmyh Well-Known Member

    Joined:
    May 16, 2012
    Member:
    #78991
    Messages:
    14,282
    Gender:
    Male
    SC
    Vehicle:
    2012 Prerunner SR5
    How does it handle with your wallet?

    :)
     
    spartanhockey6, DoorDing and CurtB like this.
  15. Feb 22, 2018 at 1:34 AM
    #15
    TrdSurgie

    TrdSurgie revised

    Joined:
    Feb 19, 2012
    Member:
    #73132
    Messages:
    4,181
    Gender:
    Male
    Oahu
    Maybe pick a title that makes sense. That way people won't happen along your rubbish posting.
     
  16. Feb 22, 2018 at 1:34 AM
    #16
    TRDZILA

    TRDZILA [OP] MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Well, I didn’t know anything about that.
    It’s been almost 20 years since I’ve had a ticket and I drive a big truck over 500 miles a night. Speeding isn’t something I normally do, and if it wasn’t safe I wouldn’t have done it.
    Granted, it was poorly written.
     
  17. Feb 22, 2018 at 1:37 AM
    #17
    TRDZILA

    TRDZILA [OP] MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Ok mr keyboard warrior.
    Edit,,,Let me help your stress level a bit. When I see a title that makes no sense, I move on.
    It helps.
     
  18. Feb 22, 2018 at 1:38 AM
    #18
    JKO1998

    JKO1998 Well-Known Member

    Joined:
    Jun 2, 2015
    Member:
    #156578
    Messages:
    53,035
    Gender:
    Male
    Utah
    Vehicle:
    Silver 07 4.0 V6 4X4 Cement 18 3.5 V6 4x4
    Soooo.... is this thread about forgetting your wallet or about your truck? Ooooooor Wut?
     
    spartanhockey6 and Tatts521 like this.
  19. Feb 22, 2018 at 1:41 AM
    #19
    jake72

    jake72 Well-Known Member

    Joined:
    Jul 7, 2012
    Member:
    #82099
    Messages:
    2,564
    Gender:
    Male
    First Name:
    Jake
    N.E. PA
    Vehicle:
    2019 trd off-road dcsb mt
    Somebody doesn't like his cdl, I know I don't have to remind you what happens if you get your license suspended. Drive safe and mods definitely don't like to read anything like you just posted.
     
  20. Feb 22, 2018 at 2:11 AM
    #20
    TRDZILA

    TRDZILA [OP] MPS SUX

    Joined:
    Jul 6, 2017
    Member:
    #223342
    Messages:
    1,089
    Gender:
    Male
    First Name:
    Brian “”Keith””
    Kokomo Indiana
    Vehicle:
    DCSB 12 slightly lifted Tacoma
    Ripped off all four mudflaps. Scratches all down both sides 6112’s up front on 3rd notch 5100’s in back with Toytech 1” block Skids & sliders from SOS Concepts I got rid of the 1” block and put on Wheelers 1 1/2” progressive AAL. SPC UCA. Be sure your standing on the drivers side when reading the instructions! I swapped sides so many times that I can swap UCA’s in 15 minutes. I put in the 3/4” spacer to eliminate the Taco Lean, and just got my 4th alignment. Traded the OEM rims for 17” Sport rims and a bora bora 1” spacer. I got my Firestone 285/70/17 MT2’s. Pelfreybilt gas tank skid and hi-lift jack should be here Friday. Looking at bumpers, but I think they will wait for next year. So far I’m happy with my build. I’ve done it all myself, leading to a lot of cussing and frustration, but it’s all mine.
    Neither. It’s a test to how many bored folks that have nothing better to do than tell someone that could care less that his writing skills won’t earn him a PhD.
     
Thread Status:
Not open for further replies.

Products Discussed in

To Top