Found real push pull OEM replacement switches

Thought I'd pass this link along. These switches are the closest I've found to stock. They are push switches and fit in factory switch locations without dremeling.

this store on ebay http://stores.ebay.ca/on-board-air-...=1078282987&_trksid=p4634.c0.m14.l1513&_pgn=7
page 7-8 of his store.

website
http://www.aironboard.com/online/toyota-replacement.html

getting one for my bed lights. They are kinda pricey tho.

 

I have two spot light and one fog light switches but they only cost about $15 each

http://www.ebay.com/itm/261546468082?_trksid=p2059210.m2749.l2649&ssPageName=STRK:MEBIDX:IT

Just have to figure out where I can install them...

 

I really wish I had found these before doing my DRL switch mod.
Damn it

 

Yep they look very clean and almost OEM.

 

Any installed pics?

 

Just ordered LED Light Bar & Strobe.

I'll post pick when it arrives.

 

Nice job man. I know ill be grabbing a few.

 

Those look pretty nice.
Amber or red? Anyone? Bueller?

 

I got blue/blue almost a really cool white matches better with the white dash illumination

 

Thanks for the share!

 

Here are mine installed:

I got the amber color.

Lights off, Switches off


Headlights on and switches on



Beware, the wiring diagram provided with the switches was incorrect. This caused me to blow a lot of fuses and I spent about 30 mins with a test light and multimeter trying to determine which wires did what. I finally got it and everything works now.

Here is what wires worked for me:

Black = Ground
Blue/Yellow = Dash Lights
Green/Yellow = Ignition +12 source
Red/Yellow = to relay

 

Good to know , they look great

 

The red yellow is power in for dash illumination led.

The correct wiring is
Green yellow 12v in
blue yellow power to relay/energize coil
Red yellow 12v in for illumination led
Black to ground

 

Not on mine. +12v on Blue/yellow caused text to light.

 

I wish I could find one to fill in the blanks by the aux input for the radio.

 

http://www.tacomaworld.com/forum/2nd-gen-tacoma-marketplace/246690-09-switches-blanks.html

 

Thanks. I'll read through. I saw the ones that fit loosely and are shiney instead of matte finish. Th

 

You mean these?

http://www.aironboard.com/online/toyota-replacement/tacoma-2011-2013-center.html

 

They say those are 12+, I haven't measured mine to check the size!