1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

FREE BOLT ON SLIDERS- 05+ 4D Tacoma

Discussion in 'Metaltech 4x4' started by helocat, Jan 26, 2012.

  1. Jan 26, 2012 at 11:51 AM
    #1
    helocat

    helocat [OP] Active Member Vendor

    Joined:
    Dec 16, 2010
    Member:
    #47775
    Messages:
    31
    Gender:
    Male
    We have a proto type slider we need to test fit on a 05+ 4 door 4x4 Tacoma. This is a bolt on unit. IF you have a truck in the greater Portland Oregon area and are interested contact us. (We are in Newberg) The proto is already done, built, powder coated and ready to bolt on. We need to install on a 2nd truck (your truck) to verify fixtures. You keep them once we have them installed. This is ONE SET.

    The catch:

    Your truck must be accident free. Some what modified for off road (Or buy the lift from us at the same time!:D) and will be used off road. You have to be in our general area. (We want you to go beat them up and give us feed back)

    A plus is someone who wants to work with us for future product development. (bumpers) Having a 2nd vehicle to drive is a plus as it takes time to develop new gear.

    Call: 503-822-1111 or e-mail info (at) metaltech4x4.com

    Post up a photo of your truck too!

    Mark
     
  2. Jan 26, 2012 at 11:55 AM
    #2
    97yota4wd

    97yota4wd Well-Known Member

    Joined:
    Aug 26, 2010
    Member:
    #42280
    Messages:
    13,025
    Gender:
    Male
    First Name:
    Eric
    Mesa, AZ
    Vehicle:
    alot of metal, small engine, decent travel.
    caged, camburg long travel, 50t leafpack (soon to be installed) light rack over cab, 5pt harnesses etc
    dam id be so on this if i was closer and had a second gen... and didnt already have sliders lol
     
  3. Jan 26, 2012 at 12:04 PM
    #3
    Pugga

    Pugga Pasti-Dip Free Since 1983

    Joined:
    Jun 18, 2010
    Member:
    #39131
    Messages:
    28,792
    Gender:
    Male
    First Name:
    Mike
    Massachusetts
    Vehicle:
    '13 Ford F-150 SCREW
    F-150 Mod
    :frusty:
    Wrong coast again... I want bolt on sliders dammit!
     
  4. Jan 26, 2012 at 12:11 PM
    #4
    907taco

    907taco Alaskan Assassin

    Joined:
    Mar 27, 2010
    Member:
    #34091
    Messages:
    1,364
    Gender:
    Male
    First Name:
    Bobby
    Alaska
    Vehicle:
    2010 BlackSandPearl 4x4
    ultimate lift kit ( toytec ) ome dakar leaf pack , w/ extended length billies, LR uca's, Pro comp 7089s, KM2's 285 70 17, neoprene seat covers, weather techs, CBI sliders w/kickout, URD ss, cab mount chop, VHT night shade tint>tails,3rd B-light. Debadged. Grillecraft grille, rear diff breather mod. CBI Moab front bumper, warn M8000 winch, HID kragens 7", Hella's micro fogs. retrofit headlights HIDS, LED solutions maps/license! 886 back up light mod,
    :rant: i hate living in alaska.. some lucky bastard is gonna get hooked up!
     
  5. Jan 26, 2012 at 12:12 PM
    #5
    Zac808

    Zac808 Custom User Title

    Joined:
    Aug 31, 2009
    Member:
    #22040
    Messages:
    2,823
    Gender:
    Male
    First Name:
    Zac
    Viva Las Vegas
    Vehicle:
    08 TRD DC SB 4x4
    In my sig
    I'm deployed and your more then welcome to pick it up in Vegas and do as you please :). Great job in hooking someone up.
     
  6. Jan 26, 2012 at 12:13 PM
    #6
    907taco

    907taco Alaskan Assassin

    Joined:
    Mar 27, 2010
    Member:
    #34091
    Messages:
    1,364
    Gender:
    Male
    First Name:
    Bobby
    Alaska
    Vehicle:
    2010 BlackSandPearl 4x4
    ultimate lift kit ( toytec ) ome dakar leaf pack , w/ extended length billies, LR uca's, Pro comp 7089s, KM2's 285 70 17, neoprene seat covers, weather techs, CBI sliders w/kickout, URD ss, cab mount chop, VHT night shade tint>tails,3rd B-light. Debadged. Grillecraft grille, rear diff breather mod. CBI Moab front bumper, warn M8000 winch, HID kragens 7", Hella's micro fogs. retrofit headlights HIDS, LED solutions maps/license! 886 back up light mod,
    but if you decide to make a rear "high clearance" tube bumper and are willing to ship I am game for that.!
     
  7. Jan 26, 2012 at 12:28 PM
    #7
    YFZ450MOE

    YFZ450MOE When you blow off steam you get an eyepatch

    Joined:
    Feb 16, 2011
    Member:
    #51261
    Messages:
    1,251
    Gender:
    Male
    First Name:
    Moe
    Auburn, WA / Roseburg, OR
    Vehicle:
    09 white DCSB TRD (it's getting there)
    Icon Extended Travel 2.5" Coil Overs All-Pro U-Bolt Flip Kit Bilstien Rear Shocks Fabtech Add-a-Leaf Icon Upper Control Arms All-Pro Rear Bumper w/ Wrap Arounds & Hitch with custom LED plate light BHLM and Morimoto III D2S retrofit Satoshi Grill 2 Hella Black Magics behind Grill Bestop Supertop BAMF sliders
    I have an 06 AC with a 3" lift but I live in MI. I will be moving out there in June as I am from roseburg. Then I'm going to buy a DC. You send em to me I'll send picks and bash on em for awhile out here. I'll cover shipping then come to the shop when I get there in June!
     
  8. Jan 26, 2012 at 1:15 PM
    #8
    all.on.black

    all.on.black Well-Known Member

    Joined:
    Jan 2, 2008
    Member:
    #4066
    Messages:
    1,473
    Gender:
    Male
    Auburn, WA
    Vehicle:
    06 Double Cab Sport with a few mods
    What kind of sliders are they (square/tube/thickness)? Do you have any pictures of them? I might be interested in swapping out my current sliders.
     
  9. Jan 26, 2012 at 1:33 PM
    #9
    commando

    commando Well-Known Member

    Joined:
    Jan 13, 2012
    Member:
    #70605
    Messages:
    178
    Gender:
    Male
    First Name:
    Brandon
    Oregon
    Vehicle:
    2006 SR5 Double Cab 4X4
    3" spacer lift
    I could do it. I have a 2006 4X4 DC. I Live in Salem, so I am pretty close.

    My truck has a tiny bit of damage on the rear QTR panel. Am I disqualified?

    I was planning on fixing it soon...

    [​IMG]

    [​IMG]

    [​IMG]
     
  10. Jan 26, 2012 at 3:41 PM
    #10
    snowgod06

    snowgod06 UG legend wannabe

    Joined:
    Apr 26, 2009
    Member:
    #16454
    Messages:
    5,169
    Gender:
    Male
    First Name:
    Rob
    A farm field, OREGON
    Vehicle:
    06 Access Cab CLONE
    crap bolted and welded together....
    If you ever need a AC 4x4 let me know, I can be without my truck for weeks without a problem :) I'm not very far from you.
     
  11. Jan 27, 2012 at 9:13 AM
    #11
    helocat

    helocat [OP] Active Member Vendor

    Joined:
    Dec 16, 2010
    Member:
    #47775
    Messages:
    31
    Gender:
    Male
    Brandon thanks for jumping into the running here. No worries on the little bit of body damage there.

    Cool, we do need an AC 4x4 to check fit and make a version for it. Give us a call if you can.

    Thank you,

    Mark
     
  12. Jan 27, 2012 at 9:18 AM
    #12
    06TRDZombieHunter

    06TRDZombieHunter Well-Known Member

    Joined:
    Nov 26, 2010
    Member:
    #46753
    Messages:
    231
    Gender:
    Male
    First Name:
    Robert
    Hillsboro, OR
    Vehicle:
    06 TRD Sport DCLB
    K&N Intake System Port and Polish of TB x2 E3 Diamondfire Sparkplugs 2.5" Leveling kit 32" BFG A/Ts Zombie Response decals Custom painted grill, trim under headlights, scoop, intake and manifold. No more mud flaps, Temp gauge inside intake box, BHLM, extra D-rings in front of bed, No more plastic storage box behind rear seats. More to come.
    Im in Portland.. Well.. Beaverton.. And would love to test these for you!
     
  13. Jan 27, 2012 at 9:29 AM
    #13
    06TRDZombieHunter

    06TRDZombieHunter Well-Known Member

    Joined:
    Nov 26, 2010
    Member:
    #46753
    Messages:
    231
    Gender:
    Male
    First Name:
    Robert
    Hillsboro, OR
    Vehicle:
    06 TRD Sport DCLB
    K&N Intake System Port and Polish of TB x2 E3 Diamondfire Sparkplugs 2.5" Leveling kit 32" BFG A/Ts Zombie Response decals Custom painted grill, trim under headlights, scoop, intake and manifold. No more mud flaps, Temp gauge inside intake box, BHLM, extra D-rings in front of bed, No more plastic storage box behind rear seats. More to come.
    First photo is right after I bought the truck and drove out to the coast and back. (Newport Aquarium trip)

    Second photo is a wheeling trip in Columbia County, outside St. Helens and Scappoose.

    Third photo is how it sits now, leveled, 33" BFG A/Ts, Intake and Exhaust, URD MAF calibrator, and black headlight housing, grill and tail lights...

    I've been trying to save up for sliders for awhile now, but they keep getting bumped to the bottom of my budgets priority list. (We just bought a house, and are planning a wedding in Feb next year in Bend) Soooo sliders have been something I even considered trying to build myself with a friend at his shop.. But I really want a legitimate setup that I can trust the strength of.

    Thanks for the consideration!
    Rob (Beaverton)
    conrath.robert@gmail.com
    503-438-5677

    kdk_0319.jpg
    DSCN2519.jpg
    IMG_1653.jpg
     
  14. Feb 3, 2012 at 1:44 PM
    #14
    rkfoote

    rkfoote Active Member

    Joined:
    Oct 24, 2011
    Member:
    #65755
    Messages:
    30
    Gender:
    Male
    First Name:
    Richard
    Portland, OR
    LED Hood Scoop
    I'm in Hillsboro, here is a pic:

    [​IMG]
     
  15. Feb 3, 2012 at 2:00 PM
    #15
    Mitch

    Mitch Somebody call for a Wambulance?

    Joined:
    Jun 27, 2011
    Member:
    #58964
    Messages:
    5,847
    Gender:
    Male
    First Name:
    Mitch
    Tigard, OR
    Vehicle:
    2007 Access Cab SR5 4x4
    Lights, Siren, Drugs, Needles, Electricity
    If you guys start developing bumpers I can drop my '07 AC 4x4 off
     
  16. Feb 13, 2012 at 4:05 PM
    #16
    Cortland

    Cortland THIS IS AMERICA!!!

    Joined:
    Mar 25, 2010
    Member:
    #33948
    Messages:
    1,529
    First Name:
    Cortland
    Arizona
    Vehicle:
    Clifford aka Big Red
    Camburg 4" Spindles, 5100's All Around, All-Pro 1.5" Leaf Pack, All-Pro U-Bolt Flip Kit, Avid Sliders, AFE Pro Dry Filter, Wicked Flow 18" Muffler
    What kind of bumper are you planning on producing? Tube? Hybrid? Plate?
     
  17. Feb 21, 2012 at 4:54 PM
    #17
    helocat

    helocat [OP] Active Member Vendor

    Joined:
    Dec 16, 2010
    Member:
    #47775
    Messages:
    31
    Gender:
    Male
    We have slected the test rig for the free sliders. Thank you to everyone who has offered up their rigs to hellp. We may have more test opportunities in the future so please keep an eye here or our Face book page. http://www.facebook.com/pages/Metal-tech-4X4/90804635893




    You got it. If we need a test rig we might hit you up.

    Plate with optional tube on top. ;)

    Mark
     
To Top