Free - Etsy vendor switch panel

I purchased this to experiment on fit for the sPod HD I have. This is the item from the Vendor in original design.

https://www.etsy.com/listing/114012...sum=6c7d8154&ref=shop_home_recs_2&frs=1&crt=1

I did some dremel work to make it fit my HD 8 switch controller. Material is pretty strong so it still sturdy with the extra holes, center expansion I did. The switch slots are "universal short" meaning no slots so any switch should fit. The discoloration in the front is my doing with a dremel sanding wheel. The original finish is a shiny black and I wanted it a little subdued. The light switch hole is pretty tight so there is a crack on one side but would still hold switch fine. Last pic shows app. location and lenght of crack with red line. The vendor made another version and sent to me to try out so no need for this one.

When fitting, it's about 90% OEM fit but would suggest a little dremel work on the tabs and inside corner as the material is a little thicker than OEM and not the smooth finish. It would make it easier to get in/out if sanded down a bit.

Free if anyone wants to try it out.

 

bump