Free Roll bar(light bar)

Not very far......maybe 15 miles max. If I had to get to I-80 from my house, I would take Rt 8 North. It would be a straight shot 10-15 miles. Or, you could go back to I-79 North and go 10-15 miles to the I-80 exit.

 

it be cool to use if it would fit

 

i'm thinking there would have to be some cutting and welding needed, since the rollbar was designed to be mounted in the front on the bed and on the wheel wells in the back.

 

I'll try and get some measurements so it won't be quite so much of a guessing game. I'll have to move stuff around.....it's kinda buried right now.

 

it reminds me of the light bar in the back for the trd hilux i saw over the week in Dominican republic.

 

I unburried and measured today. These are rough measurements +/-.

Mounting surfaces are 5"x5" squares centered on the tubing with a bolt hole in each corner. There are a total of 4 squares with 4 bolt holes each.
Front(closest to cab) width from outer edge of brackets is 56.5".
Rear(over wheel wells) width is 58".
Length from front to rear is 37.5".
height difference on rear bar(for wheel well) is 7.5".
Overall height is 37.5".

Let me know if you need any other info.

 

i don't think im gonna take it now buddy. i think im gonna go a different route with my truck but i really appreciate it bud. all else fails put it on ebay.

 

That's cool. I'm probably just gonna store it for a while. There is one just like it listed on CR and nobody is buying. Just curious, would it have even come close to fitting the 2nd gen bed?

 

i dont think