:p

Sounds good.

 

Sweet!

 

All pro expo leafs are here. Shocks for the rear are being built, and should be here in the next month or two.

 

Something else is here... Dirt King LCA's! Just waiting for new bushings and uni balls for the TC UCA's.

 

@ChamYota

 

Jesus your quick...

 

When you're in college waiting for class to start you can be stupid quick

 

Giggity

 

Welded on a tab to mount my antenna! Yippee

 

How do you like the Dirt King lca's? Trying to decide between those and the TC ones. Do the bushings need to be lubed?

 

@LoadedTaco can tell ya more! I've held off putting anything new on my truck because I'm getting a frame replacement this September, Sooo I figured doing everything when I have a fresh frame to work off would be best. A lot of welding is going to be happening... And no one likes cutting stuff off after a couple months!

But I went with them because they were a little cheaper, built like a brick s*** house, don't require wheel spacers, have limit strap tabs and are all around wicked!

You'll want to apply lube the same way you would for any other uca or lca (Generally speaking I guess). Insert the polyurethane bushings without lube into the lca, then apply a little grease on the inside of the bushing to help install the metal inner sleeve. Once you have everything installed on the truck, but not tightened, you'll take your grease gun and pump up each pivot through the zerk until you see grease squirt out a little, or the bushing move slightly. Then torque everything down to spec. Pretty straight forward.

Hope this helps!

 

Awesome thanks. Looking forward to seeing your set on the fresh frame.

 

Me too brotha! I'm chomping at the bit... But I'm using the truck to its capacity in the mean time!

 

Internet high five if you can tell what's wrong with this picture.


Here's a better shot of the driver side lca I took off.

 

Good Looking Tacoma

 

Thanks man!

 

Installed icon extended travel 2.5 rr, dirt King lca, and new half shaft. Just need to mount the reservoir.

 

Fugging beast


Wait.. What do the cool dudes call it? EAF?