1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Front and rear bumpers

Discussion in '1st Gen Tacoma Marketplace' started by 45acp, Jul 22, 2013.

  1. 45acp

    45acp [OP] Paint me back in Wyoming again...

    Joined:
    Aug 9, 2009
    Member:
    #20861
    Messages:
    5,707
    Gender:
    Male
    First Name:
    Jonathan
    Boring, Wisconsin
    Vehicle:
    bone stock/unmolested 04 2.7L
    Made them myself. Obviously gonna need to modify the truck for them to fit. Rear bumper is made entirely of 1/4" wall and weighs ~100lbs. Front is 1.66"OD x .140 wall and weighs ~40lbs IIRC.
    Asking $100 each plus shipping. :notsure:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. The Chive Turkey

    The Chive Turkey Jake

    Joined:
    Dec 14, 2012
    Member:
    #93075
    Messages:
    94
    Gender:
    Male
    First Name:
    Jake
    Simi Valley
    Vehicle:
    99 Tacoma
    Armor, Lights, Rubber
    Looks like the rear would require cutting the bedsides? I'm interetsted.
     
  3. 45acp

    45acp [OP] Paint me back in Wyoming again...

    Joined:
    Aug 9, 2009
    Member:
    #20861
    Messages:
    5,707
    Gender:
    Male
    First Name:
    Jonathan
    Boring, Wisconsin
    Vehicle:
    bone stock/unmolested 04 2.7L
    Yeah it would. Though, I'm sure you could still use it without bobbing the bed too.
     
  4. Lumpskie

    Lumpskie Independent Thinker

    Joined:
    Apr 20, 2013
    Member:
    #102450
    Messages:
    1,861
    Gender:
    Male
    Colorado
    Vehicle:
    '96, 4x4, v6, manual hub
    Toytec 16" coilovers with Tundra Bilstein 5100s, Light Racing UCAs, Alcan Leafs with Orbit Eyes, 12" Bilstein 7100 short Bodies, ARB rear locker, 33x12.5 Duratracs, CBI sliders, Bushwacker fender flares, self made front bumper, M8000, Vision X 6.7" Hi/Lo Beam HIDs, full skids, Inchworm dual case setup - 15º clocking
    Bump for you. That front bumper is SWEET.
     
  5. TIPICOTACO

    TIPICOTACO Well-Known Member

    Joined:
    Nov 22, 2010
    Member:
    #46556
    Messages:
    1,965
    Gender:
    Male
    First Name:
    Tyler
    nw nj
    Vehicle:
    '01 DC 4X4 TRD "RAD BARON"
    few things here n there, check out the build
    yea that front bumper is awesome! if you were within a few hours of me I'd take it... but you're not.....:pout:
     
  6. e34croak

    e34croak Tacoma Susp. Confuses Me

    Joined:
    May 31, 2012
    Member:
    #79809
    Messages:
    157
    Gender:
    Male
    First Name:
    Dan
    Oregon
    Vehicle:
    2001 Tacoma 4x4 SR5 TRD
    ARB Deluxe Bumper.
    Any Idea what it might cost to ship that front bumper to 97401 (oregon)?
     
  7. CliffordBRD

    CliffordBRD Well-Known Member

    Joined:
    Mar 29, 2012
    Member:
    #75835
    Messages:
    189
    Gender:
    Male
    First Name:
    Cliff
    Alexandria, VA
    Retro'd headlights
    price quote on front bumper shipped to 21401? Appreciate it!
     
  8. The Chive Turkey

    The Chive Turkey Jake

    Joined:
    Dec 14, 2012
    Member:
    #93075
    Messages:
    94
    Gender:
    Male
    First Name:
    Jake
    Simi Valley
    Vehicle:
    99 Tacoma
    Armor, Lights, Rubber
    I'll be moving to Iowa the second week of August. If you still have it I might have to come up and see what I can do
     
  9. Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    49,292
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    Whaaa?? Why are ou seeking the front? You just made it!
     
  10. 4x4yota

    4x4yota 4wd is awesome

    Joined:
    Apr 9, 2013
    Member:
    #101726
    Messages:
    356
    Gender:
    Male
    First Name:
    Collin
    PA
    Vehicle:
    02 trd stepside v6
    +1 how come ur getting rid of the bumpers. Are u going for a new look
     
  11. Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    49,292
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    Well..the rear I can understand as he doesn't have a rear frame anymore..or a front..annnnddd I just answered my own question
     
  12. porchop

    porchop Well-Known Member

    Joined:
    Mar 24, 2013
    Member:
    #100463
    Messages:
    1,857
    Gender:
    Male
    First Name:
    Brad
    NJ
    Vehicle:
    '15 wrx
    BHLM, Grillcraft, BAMF Light Bar w/ Hella 500FFs, BAMF CB mount, Bilstein 5100s w/ OME 885x coils, MBRP Exhaust, Weathertechs, MotoMetal 957s on 265/70/17 Hankook ATMs
    How much would I need to cut off the bed to fit that rear bumper?
     
  13. 45acp

    45acp [OP] Paint me back in Wyoming again...

    Joined:
    Aug 9, 2009
    Member:
    #20861
    Messages:
    5,707
    Gender:
    Male
    First Name:
    Jonathan
    Boring, Wisconsin
    Vehicle:
    bone stock/unmolested 04 2.7L
    It was basically a prototype. :eek: It bolts up, the next one will be welded on and integrated into the cage. I wanted to see how it looked and I also wanted to play with the new tube bender haha


    Wasn't expecting that many replies and PMs for the front. :anonymous: To make this easier, here's the info you need to figure out a quote-

    50lbs
    68"x28"x15"
    My zip is 53189

    Can't ship via USPS, FedEx has better rates than UPS. If you know of another method, LMK.
     
  14. 45acp

    45acp [OP] Paint me back in Wyoming again...

    Joined:
    Aug 9, 2009
    Member:
    #20861
    Messages:
    5,707
    Gender:
    Male
    First Name:
    Jonathan
    Boring, Wisconsin
    Vehicle:
    bone stock/unmolested 04 2.7L
    I don't think you'd need to bob it at all, just high-clearance it.


    In regards to the crossmember for the front - rather than having to build your own, I could always send the front section of the frame that has the body mounts and crossmember welded to it? Then you could cut your frame, weld this one on and plate reinforce it.
     
    Last edited: Jul 23, 2013
  15. Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    49,292
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    You would have to bob the bed for the rear wouldn't you..I mean..you cut like 7" didn't you?? So it will be way short.
     
  16. 4x4yota

    4x4yota 4wd is awesome

    Joined:
    Apr 9, 2013
    Member:
    #101726
    Messages:
    356
    Gender:
    Male
    First Name:
    Collin
    PA
    Vehicle:
    02 trd stepside v6
    :confused: what do u mean no frame.

    Edit: i found out haha looking through the build thread. Looks like hes doing a full tube cage
     
    Last edited: Jul 23, 2013
  17. Opi

    Opi Well-Known Member

    Joined:
    Jul 10, 2013
    Member:
    #107977
    Messages:
    47
    Gender:
    Male
    Coplay PA
    Vehicle:
    02 TRD SR5
    Falken Wild Peak A/t
    pics dont work?
     
  18. TRDoffroad

    TRDoffroad Well-Known Member

    Joined:
    Jan 1, 2013
    Member:
    #94154
    Messages:
    117
    Gender:
    Female
    First Name:
    Jen
    Vehicle:
    2004 tacoma 4x4
    Blacked out grille, smoke headlights, smoke taillights, custom skid plates
    Sent him a pm for the bumper but no response either
     
  19. 45acp

    45acp [OP] Paint me back in Wyoming again...

    Joined:
    Aug 9, 2009
    Member:
    #20861
    Messages:
    5,707
    Gender:
    Male
    First Name:
    Jonathan
    Boring, Wisconsin
    Vehicle:
    bone stock/unmolested 04 2.7L
    Sorry, been a tad busy

    [​IMG]

    I've been somewhat inundated with responses for the front bumper so I was hoping that posting the shipping info would help, as it seems to be a bit much for some. Unless someone knows a cheaper way to ship.:confused:
     
  20. somethinboutayota

    somethinboutayota Dorthy left Kansas for a reason

    Joined:
    Apr 2, 2013
    Member:
    #101146
    Messages:
    4,335
    Gender:
    Male
    First Name:
    Parker
    Dodge City, Kansas
    Vehicle:
    Go to get alignment- replace whole front end
    Debadged and painted, plasti-dip bumper , Sock monkey decals, tool box, K&N cold air intake, flag holder/fishing pole holder, Satoshi, magnaflow 40 series, spidertrax wheel spacers, map lights, led reverse lights, led dash assembly lights, roof top LED bar
    Winch come with bumper? :D I might be interested
     
To Top