Front end alignment issues

Ive replaced my lower control arms, all the Cam bolts for adjustment, as well as my tie rod ends on my 2008 Taco would there be any other components that wouldn't allow for a proper alignment?

 

Are you lifted or stock height?

 

Is the truck lifted?​

 

lifted, 3 inch spacer up front 2 inch block in the back

 

There's your problem. Are you running stock upper control arms?

 

Need aftermarket UCA's for proper alignment

Im willing to bet

 

@EatSleepTacos ​

 

yes

 

Check out light racing control arms. Those will give you enough adjustment to get back into alignment. Or just drop the front end to a 2" lift.

 

http://www.headstrongoffroad.com/st...g)_Ball_Joint_Upper_Control_Arms_-_25470.html

 

is there a after market fix for this problem

 

​

 

oh yeah spacer lifts baby

 

Yes, the link I quoted above. You can either do that, live with a bad alignment, or lower your front lift

 

Cool, thanks boss ill look into that I've done everything else i may as well do that as well.

 

I've had this lift on for years and haven't had an issue tell i needed new tires and it was good.
ever heard of that happening in this type of lift situation

 

While you're at it, you might as well get a better quality suspension if you can afford it. This will replace all 4 shocks, new coils to lift the front and an add a leaf to lift the rear. This kit comes with the option to add new UCAs too.

http://www.headstrongoffroad.com/store/p440/Coil/Bilstein_5100_Kit_-_(HS05BK-1).html

 

Sucks man. Same alignment people?

 

just put new bilstiens on it that was what i originally sent it in for and a new set of tires only thing i have left now would be the upper control arms