SOLD: All-Pro Uniball Upper Control Arms - $450 + Shipping

SOLD!

Complete set of 1st Gen All-Pro Off Road tubular uniball upper control arms:

• Arms
• Bushings & sleeves
• Washers
• Uniballs
• Misalignment spacers
• Spindle adapters & clips
• Through bolt, washers & nuts

Only about 12k miles on them. The uniballs have slight surface rust outside the wear zone, but they are still tight and move well. No chirping or squeaking from them for the entire time I’ve run them. The bushings are still in good shape as well and have never squeaked since changing to moly-fortified grease. They were always greased at every oil change.

Nothing at all wrong with the UCAs, I just went a different direction in my build.

All of the parts have been cleaned up as best as possible, so functionally, these are just as good as any new tubular uniballs arms that will run at least $650 plus the cost of shipping.





Asking for $450 PLUS SHIPPING from 80501. As you can see in the picture below, they’re going to be around 18-19 pounds once they’re boxed up.



Thanks for checking these out!

 

great deal

 

Pm’d

 

UCAs are sold!

Thanks for looking!