FS: Aluminum Seat Spacers, Risers, Jackers For Seat Mod, Xmas Sale

i used a washer that was way thinner than the one on the factory bolt. Do you guys think I should find a thick comparable washer?

 

Thank you. I can't wait to try it.

 

Best $ per benefit ratio of any mod I’ve done. Glad I ordered both sides at once. Thank you @olecoot

 

Paypal $ sent for 1 set of spacers and bolts for 1 seat. Address for shipping included in Paypal notes. Thank you.

 

Thank you. If you don't mind would you post it on the What Have Done To Your Today forum. They will benefit from your feed back. Thank you again

 

I can and have made some 1/2" and 3/4" for some of the taller drivers. So you are not locked in for just 1" risers or spacers. Thank you everybody.

 

Sunroof? How tall are you?

 

I installed mine. It feels good to be able to at least see over the hood now. I was not able to take the washers off the OEM bolt so I just installed the spacers without the washers.

 

The washers are 3/8 if you want to get them. The bolts were the toughest to locate that is why I thought about making them available, maybe I should have thought to add the washers. Never thought I would have so many request for the seat mod.

 

its a great mod, and a well done product, with some great customer service to boot. seats are so much more comfy now

 

Thank you for the compliment .

 

My main concern is actually the lack of thigh support (I'm 5'10" with a 32" inseam as well). I haven't driven longer distances yet, so I don't know if it's a problem for me or not. That said, raising the seat in the rear would put the legs at a slightly different angle. Can anybody comment on that?

 

I am around 5'10" same inseam and it helped me tremendously. That is the only reason I would make them . That being said, I have made 3/4" ones for several folks from 5'10" to 6'1" Easy way to figure it out would be to pull the 2 bolts in the rear and slide something under the mounting points around 3/4 or 1 inch thick, you will instantly feel the lumbar support and the less pressure under the legs. It isn't an expensive mod so you can't waste more than what a bad meal cost. Let me know. Hope this helps.Thank you

 

Any 1" available?

 

Absolutely, always.

 

Just paypaled you for one set with hardware!

 

Gotcha covered. Ship tomorrow. Thank you

 

Dame Im going to have to try the block of wood tomorrow under the feet to give this a try.

 

That is a great way to see if it works for you. Haven't heard one negative feed back yet, but there is always a chance . Good luck, be safe

 

Just put in an order for the 3/4" risers. Excited to see the difference and thanks!