SOLD

I have a set of used Camburg 1.25" uniball upper control arms for 2nd Gens.

They are in good shape. There are some nicks and bumps in the paint and worst is a spot where my wheels rubbed at full lock. (I have 35's and was running the wrong offset), but I have a full set of stickers you can cover them up with.

I just took them apart completely and inspected and relubed everything. The uniballs were replaced in March of 15 and the bushings are solid and have been relubed with Camburgs white super grease. Ready for install and wheeling!

Everything that is included is in the pics. I also have custom made uniball removal tools so that you can service them yourself in the future. It's hard to find good tools for this in the 1.25" size, and I have the socket for the 12point bolts on the mis alignment spacers.

I'm located in Napa, CA and asking $old

 

What was offset of 35's? Im interested but thats what im running. 35x12.50r17's
But rims are 17X9 6X5.5 4.5 BS.

 

I was running 16x8 with 4.5". 4" offset would have cleared at a minimum.

 

I have -12 offset. Will these work?

 

It should be fine if you're running 35's. Any other size tire like 285 and below are fine with 0 offset.

 

So far these are SPF

 

Whats a model number. I can check to make sure

 

Still have them?

 

I'm waiting for payment at the moment.

 

If the sale falls through ill take them

 

Still for sale