DELETE Fold-a-Cover G4 Elite (6 ft. bed)

$100...but read on.

Functionally, it works fine. Aesthetically, it has a few "issues" which I've tried to show in the photos.

1. The underside of the front panel has a gash that's been that way since it was delivered. It's not visible when the panel is closed and doesn't affect the operation in any way.
2. The front seal is not attached, but I have it and it's perfect condition.
3. The front hinge cover seal is shot. I replaced the rear one not long ago. They're available for $20 and not difficult to install.
4. The rear panel has a significant sag, due to water getting inside before I replaced the hinge cover seal.

I've got all the parts and pieces, installation and care instructions, and key. I'll even throw in the ratchet wrench that fits the mounting hardware. I used this to take the entire cover off when necessary (about a 10 minute job).

I'm asking $100 for a cover that sells new for around $850. It's not pretty, but if you just need a functioning hard fold cover, this is a steal.

Local pickup only in Charleston, SC. I might consider meeting within 50 miles.

 

EDIT: The rails have been cleaned up.

I should add that the side rails have a lot of residue from the adhesive gasket material. It's a bitch to remove.

 

Bump. Somebody must want a cheap bed cover.

 

BOOP!

 

Bump. For what it's worth, Fold-a-Cover sells replacement panels. The rear panel is around $200, so for $300 total you could have a basically new cover.

 

Immaboop again. Don't make me throw this in the garbage.

 

Last bump...for now.

 

Bump one more time.

 

Dude you need to try craigslist or facebook marketplace. I'm looking for a cover and at this price I would jump at a heartbeat if you were closer. Seriously man don't let it go for free. Try facebook marketplace.