FS: Old Skool Fabrication Tools (non-shippable)

dirtfondler · Dec 18, 2014

Sorry, but I am not interested in trying to ship a 600lbs tool anywhere. I am in northern CA near San Jose. I may be able to drag these up to Tahoe with me in the near future. Otherwise, they are pickup at my place.

Rotex A18 Turret Punch. The 18A includes 17 punches of various sizes and and a small shear. It will fit up to a 2" diameter punch though this one currently has a 1-21/32 in the largest location. No missing tools and all make a nice clean hole. Not perfect, but a lot better than most others for sale. Original Rotex paint, how many of those for sale still have the original paint on them? Asking $2600.

Baldor Tool Sharpener / Grinder with Baldor Pedestal. The tool grinder/tool sharpener is a 1/2HP, 3 phase 220V with reversible switch on front. It includes BOTH water/lubricant tanks and one of the tanks has a petcock (seems clogged with rust). The light shield has a crank in it and one table tilt bolt is missing (I replaced it with an allen bolt), but otherwise this unit is in great shape. The grinder wheel that is on the right side is nearly new. There is no abrasive nor diamond wheel on the left side. On ebay these range from 400-over 800 and very few are in this nice of condition. Asking $550

Baldor Bench Grinder with Baldor Pedestal. The grinder is a 3/4 HP, 3 phase 220V with 8 inch wheels. Model 8123W. It has two non-matching lighted safety shields. It is wired through a ridiculously overkill junction box with a relay. Main power switch on the box powers the lights while the grinder is powered by the monstrous push button on the front. The sheetmetal shield on the wire wheel side has a crack in it. I can MIG weld this for you if needed, but it will burn off some of the paint. Otherwise the unit is in good to great shape for the vintage it is. It is definitely original paint. Also includes what I believe is an authentic Baldor liquid tank that is cast iron (try to find another one of those on ebay.) ebay sells these grinders for 4-500 without the pedestal and the pedestals for 250 by themselves. Asking $450