FS 1" Seat Spacers by QuikFix™ OBSOLETE *SEE "SAFER" SPACER AD

UPDATED 8/31/23. ***NOTE - THIS STYLE IS NOW OBSOLETE. I NOW PRODUCE A BETTER SAFER PRODUCT AT THE FOLLOWING LINK:
https://www.tacomaworld.com/threads/fs-new-safer-quikfix™-seat-spacers-rear-brackets-33-60.809869/
Square body with contour cutout to match the shape of the rear front seat anchor brackets. Better and more secure coverage than simple store bought round spacers. Unique copyright design makes it less likely for the seat bracket to be knocked off of the spacer in an accident. Raises the rear brackets almost 1". Makes the seat more level to minimize back and leg issues which has plagued the Tacoma. Definitely an improvement in seating comfort. Sits more like a truck and less like a Camry. Fits bucket seats in 2nd gen & 3rd gen Tacoma trucks as well as all 2007-2014 FJCruisers. These are made from 6061 grade aluminum and include free required grade 10.9 longer flange bolts and free Priority shipping. PM for info. Accepting PayPal exclusively. Course brushed aluminum finish is ready for painting. Nearly 2700 pair sold and installed since March 2019. Thanks for looking.

DISCLAIMER (legal): The quality and strength of materials is excellent, however, you are changing your seat configuration at your own risk. I use these in my personal vehicle at my own risk. The included bolts have a 150,000 psi tensile strength which are incredibly strong.

 

First few sets have now shipped.

 

I prefer to have the front of my seat elevated. Can these be used on the front mounts instead of the rears?

 

Sorry but no. The fronts are completely different and anchor on an angle.

 

Lowered price to be more fair market priced. See first post. Partial refunds have been distributed.

 

Shipped some to test on 2nd gen. Should have results by 3/26/2019.

 

Sunday shipments heading to post office. I suggest start tracking Monday evening (3/25/2019).

 

New TW Member prices listed in 1st post. Must pm me for this price.

 

Down to last 2 finished pair. Will have another 25 pair ready around April 8th. Thanks to all.

 

The next 25 pair will be ready 04/11/19

 

Will have 25 new pair ready Friday 4/12/19. 4 pair already sold. Note new lowered price of $36.50 forum price.

 

Posting 10 pair tomorrow afternoon on ebay. The rest on forums.

 

As of now I have 3 pair not spoken for (on ebay)

 

I am nearly out of stock. I will take a few days off and then begin making another 25 to 35 pair. Thanks for all the interest.

 

Do you have any left

 

Forgive me but I have 4 extra pair that were hidden that I was not counting. So I now have 6 total pair (3 on ebay and 3 here) remaining as of 8:46 pm est.

 

Sometimes I get overwhelmed putting together packages to ship. I do not always include instructions. Some may need them. Some may not. For this reason I am posting a copy here.

 

I still have 4 pairs available from the last run. Will not make more until early May.

 

Note to buyers with sliders welded to your frame. A customer had to add a washer to each side of the driver seat. We were baffled. Finally figured out the welded slider on the driver side affected the threaded holes. Had no issue on the passenger side. This is the only issue found in over 30 pair sold. So if you have welded sliders, and you add spacers under the seat to floor brackets, you may need to pick up a pair of washers for the 10 mm bolts. This is info for any brand or style of seat spacers that you buy.

 

I am down to the last pair of spacers. I have ordered material for the next run and the material prices have been reduced. This last pair are discounted to deplete inventory and, as of now, the next batch will have these new lower prices. Same quality grade 6061 material and same grade 10.9 flange bolts. I expect to start production in the next 10 days with a release somewhere between May 15 and May 31. Note ebay prices are higher to cover fees. New member direct paypal prices are:
1 pair $35