G-Tek Fab Door Sill Protectors 2nd & 3rd gen

I forgot to mention I'm now using a more "installer friendly" 3M adhesive system on my dsp's. Every once in a while I hear from someone who didn't set them just right and they couldn't remove them in time to take another shot at it so I'm using

$8 3M VHB 100x200mm~ (4" X8") Double Sided Foam Adhesive Sheet Tape 5952 Automotive Mounting Industrial Grade Very High Bond 5952 (1 Sheets 100x200mm)

3M VHB that takes up to 24 hours for full strength grab. The stuff I was using befor was almost instant to 1 hour full grab. Brutal...

Anyway, if you don't get one set just right with this new VHB all you need to do is start at one end and of the dsp and SLOWLY lift until the entire protector is off the sill, then give it another shot.

 

Who likes LED spot lights?!

From 7/13 until 8/13 anyone purchasing a full set of G Tek Fab door sill protectors from me here on Tacoma World will be entered in a drawing for a free set of 4" 18 watt Cree LED spot light bars.

These little gems can be mounted anywhere but they actually work great for mounting under the rear bumper with a dedicated switch for lighting up your trailer or just whatever's behind you. Perfect for ATVs too!

These are very well made, bright and come with all the mounting hardware. (Harness, switch and relay not included)

 

Bump! I'm running low on 3rd and 2nd gen 2.0's for the D.C so get em while I have em!

 

Shipped again guys!

Remember, everyone ordering between 7/13 and 8/13 is automatically entered in the raffle for a pair of 4" CREE LED Spot lights.

 

I didn't see any pricing or ordering information on these anywhere?

 

Start a conversation please.

 

G-TEX I'd like a quote on Non Diamond Plate Carbide Texture in Black they are for a 2013 Toyota Tacoma Access Cab. Thanks

 

Please start a conversation.

 

Everything is shipped to date.

Braddahs is Hawaii will have to be patient, I was told early this week shipping to the islands will take 30 days. All shipping is on the water not in the air. I can only imaging why.

 

...and BUMP!

 

Friday ship!

 

Just picked up some more 2nd and 3rd gen Double Cab Sill Protectors last night!

 

Just a reminder about installation peeps!

Please refer to the YouTube vid on the first post of this thread of Sargent Okinawa installing them on a Tundra. The Tundra and Tacoma are similar so the installation is the same.
-------------------
Which brings me to my next idea! Who's up for a free set of G Tek Fab door sill protectors for their 2nd or 3rd gen Tacoma Double Cab?!

All you have to do is purchase a set and put together an installation vid suitable for YouTube similar to the one on the first post of this thread. From there I will choose the one I will actually be using on YouTube, and if it's yours I will issue a full refund and post your video on YouTube!

If you're interested please start a conversation with me.

 

Thanks G-Tek ! I'm a lot late about the sill guards. They are fantastic ! Got mine in about 6 weeks ago. Installation was fast and easy. Brought the Taco in for service today and was asked about the sill guards. Yup told him got em from G-Tek. He was very impressed and stated these where 110% better than what he had. Kind of funny when I mentioned sill guards and he was going to show me his, but after seeing these front and rear that was all she wrote ! He didn't bother.

 

Great story, and thanks for the props DC they look great!

 

Only problem I see here is you seem to have not centered the sill protector on the rear door (bottom pic).

 

I did place both rear sill guards more forward then placing them centered. I look several times and decided that by placing them slightly more forward that it would offer more protection to where some ones foot may go in and out. I'll take another photo to explain it a little better.

 

Copy that... So those pics are both front and rear passenger side?

 

Alright, I'm have a hand full of sets for the 3rd gen DC in both powder coated diamond plate and non diamond plate. I also have plenty for the 2nd gen DC. Anyone interested shoot me a conversation and bring your zip code!

 

I forgot to mention, congrats to member TRDirty184 for winning the pair of 4" LED lights!

I'll be doing this again soon so keep an eye out!