Getting some advice before I order this setup

Hey guys

Just trying to get some last second advice on this setup I'm planning on ordering to see if there are any potential problems I didn't think of.

Going to be lifting my truck 3 inches with OME 886x front coils, bilstein 5100's all around, and a 2 inch AAL in the back. I will also be adding a pelfreybilt steel front bumper as well as a rear high clearance bumper with a swing out gate. A potential concern I have is too much sagging in the rear with the bumper, tire, and snugtop. Also ordering LR UCA and plan on rolling with 33" tires. I'm aware of the necessary CMC and other trimming required for 33".

Thanks

 

With all of that weight out back, I would get a leaf pack instead of an AAL, the stock Taco leafs aren't very good to begin with. Alpro Expos, OME Dakars, or Deavers seem to be decent options. I have Expo's on my truck and with no weight out back the ride is a little rough, but with the weight of the bumper and the tire being that far back you should be fine.