1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Getting the correct lug nuts for pro comp wheels

Discussion in 'Wheels & Tires' started by Penz83, May 12, 2013.

  1. Penz83

    Penz83 [OP] Well-Known Member

    Joined:
    Sep 2, 2012
    Member:
    #86072
    Messages:
    181
    Gender:
    Male
    Vehicle:
    05 Tacoma pre runner dbcb short bed
    I have a brand new set of pro comp wheels, and I WANT TO MAKE SURE I GET THE CORRECT LUG NUTS.

    The wheels are pro comp 5038
    http://www.procompusa.com/prodDetai...3&catID=11&subCat=210&ptID=100073&plID=108763

    Looks like they have a conical seat type, so a acorn style lug nut is needed. My only concern is the 3/8" or so thickness of the wheel where there wont be any lug nut bite with a standard acorn lug nut. So i came across these conical lug nuts with an extended tip, looks like they should work well. Any thoughts or suggestions?

    http://www.jegs.com/i/Cragar/260/27807-4/10002/-1?parentProductId=
     
To Top