got fog lights ebay

no instructions any help??? there like 4 wire you connect any help 2 red and 2 black????

 

http://cgi.ebay.com/ebaymotors/05-1...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

Do you have existing fog lights? Is that 4 wires on each light? 2 red and 2 black? Or is that 1 red and 1 black per light?

 

BTW...the fog lights themselves don't have any wires. It's just a plastic housing that you screw an H10 bulb into and then plug the harness into the bulb. Where are these wires?

 

on the harness 1 red with a fuse one black connect to the light one black that connect from the box

 

i have this same kit 2 questions


2 how do you wire it up with 2 red and and 2 black wires???the 2 black im assuming are separate grounds for each fog light,but what about the red wires???i know one goes straight to the battery from the one with the fuse, but what about the other red wire that you have to strip that doesnt have a connector to it???? please help thankyou

 

A relay has two inputs for power. One is to energize the coil inside, and should be attached through a switch. The other power input provides power to the lights when the coil pulls the relay contacts closed when you apply power to it through the switch.

 

so why do you have to strip the wire if it doesnt have like the other one which have a connector???? anyone have a diagram

 

Try this:
http://www.tacomaworld.com/forum/technical-chat/6525-diy-wiring-after-market-lights.html

 

up

 

Or this:
http://www.tacomaworld.com/forum/2nd-gen-tacomas/3990-non-oem-fog-light-install-anytime.html

 

ok