1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Heavy load bed bars

Discussion in 'Buy / Sell / Trade' started by Chachie, Nov 12, 2010.

  1. Chachie

    Chachie [OP] Well-Known Member

    Joined:
    Dec 23, 2009
    Member:
    #28047
    Messages:
    1,852
    Gender:
    Male
    First Name:
    Justin
    Nor Cal
    Vehicle:
    '06 TRD OR, 4x4, Auto, 6" Fabtech, 35's
    Locker mod, Anytime fog mod, always 400w mod.
    Hey all. I am going to be fabing up a set of heavy load bed bars. They are going to be 1.75" 1/8" wall tubing and have 3/16" plate on the ends. They are going to be bolted into the rail system, but will sit on the bed sides as well to support more weight. They will be positioned about 2.5-3" above the bed rails to accommodate a cooler, gear box, etc. under the bars. They will be about $175/set or $80 for one. I can add light tabs, looking at putting a mount for a hilift, just about anything. Looking to see what kind of interest there is. I know its hard without a picture. I will be putting up some drawings later so you can at least get the idea and then i will be fabing the first set next week.

    [​IMG]
     
  2. Chachie

    Chachie [OP] Well-Known Member

    Joined:
    Dec 23, 2009
    Member:
    #28047
    Messages:
    1,852
    Gender:
    Male
    First Name:
    Justin
    Nor Cal
    Vehicle:
    '06 TRD OR, 4x4, Auto, 6" Fabtech, 35's
    Locker mod, Anytime fog mod, always 400w mod.
    Bump for drawing.
     
To Top