Hello guys. I need some help on some 5100s

Ome 883s have a 590 spring rate but there's lot of guys running the eibachs with prerunners

 

Yeah and theres a lot of people who have spacers lifts and claim to have a good ride

 

I had a spacer lift and it had a good ride unless you went off road how's that for personal experience Mr Salty dick

 

I put on 5100's (set at 1.75) about 6 months ago with the stock coils. It wasn't too bad but the front was definitely a rougher ride. I ordered Toytec coils and put them on this weekend, set at 0. Took a pic with the Toytec at 0 on the driver side vs. stock spring at 1.75 on passenger side for reference. Definitely a better ride with the Toytec. Obviously the more you compress the springs the rougher the ride will be.

BTW, two things that I had this time that I wish I had last. An dewalt cordless impact wrench and 17mm and 19mm ratcheting wrenches. I could probably swap one of these out in less than 15 min.

 

As previously stated eibach 1.6 will do the job. Mr Salty next time you want to call me out make sure you get your facts right. Apparently mine are.

 

Looks good man ya swapping coils is a breeze with air tools I only had hand tools(all my tools are at my job site 3000 miles away) when I did my lift it took about 3 hours

 

What facts are you referring to and what are you trying to prove

Will the 884 coils not do the same as well as provide a slightly better ride?
Please wow me with your wisdom of all Tacoma lift products. I mean you already demonstrated your knowledge of Bilstiens 5100s by insinuating they came with the top hardware even though they clearly don't.

http://www.tacomaworld.com/forum/2nd-gen-tacomas/357088-bilstein-5100s-4.html#post9653872

Carry on

 

With the new coils did you set the shocks at zero?

 

Sorry just reread your post, you sent at zero. What did you do to the rear just shocks or did you do new leafs?

Can you post a side view picture with the new set up?

Thanks again

 

Got 5100's back there. I installed the wheelers add a leaf, 3 leaf pack. I did not have the tsb done.

 

Got those at work. I can take another on level ground if need be

 

Looks real good, thanks for posting pictures! It really looks a lot better than stock suspension.