Help Me Get A Lift

What they have on their site will fix the lean, but you're putting a lot more preload into that spring to keep the damper in the same position. When you hit a bump the left side will take more force to compress and will rebound faster and put more force on the damper.

I've heard it both ways, I prefer to keep all things the same and have the same preload/damping on both sides.

I don't know exact numbers. I'm just an engineer/machine designer/maintenance guy who likes to get his hands dirty.

 

It definitely makes sense, for sure. I wondered the same. Wonder what most on here do...

 

Guys... is this the best bang for buck if not doing Dakar:

https://www.headstrongoffroad.com/s...eafs_with_u-bolts_(PAIR)_-_HS-TOY055-3AL.html

They are sold out :/

 

Nope. It’s better than a spacer inside the coil.

 

I def want a suspension upgrade and do the lift right. Thanks though.

 

I’ve never had problems with rear brake lines because Toyota makes them longer. You really only need this when running extended length shocks or you have serious articulation in your leafs

 

https://www.rogue-offroad.com/product-p/bil5100tacoma16.htm

 

Shit. I was about to buy the 6112 kit from them. Wonder if I can enter that code and if it will work for the 6112

 

Theres nothing wrong with putting the clips at the same height and adding a spacer with the 6112 either, it all depends on how you want to compensate for the lean.

 

Is there a consensus around here? Also... Jay... was looking at the HS 3AAL thing. Seems like a good deal and I know you run it. They are out of stock though!

 

Check wheelers offroad, they usually have three leaf in stock for the same or cheaper price. Yep, they do.

 

which one? Edit: sorry just saw this

 

Don't I want a 2"? That says 1.5"

 

They also have 6112 and 5160s on sale

 

Leave the overload leaf in, that's what I did and I have the same set.

 

any negative for getting the 2" AND leaving the overload in? I wouldn't mind having over 2" a bit

 

None that I'm aware of but I also have a long bed and run a tool box with about a hundred fifty pounds in it in the bed at all times

 

OP, if u want to wait till Black Friday, OK4WD usually has OME lift kit with free SPC UCAs.

 

Nice. 2" or 1.5" kit in the rear?

 

Leaving the OL in with the Wheelers 3 leaf AAL gave me 2 inches on the back. Like I said I have a longbed and tool box but its plenty high.