Help with 6 inch lift on prerunner...

Hey guys, I'm lifting my taco this week and was looking at either the maxtrac spindles with a 2" spacer and 4" rear block or just going with a 6" procomp lift which honestly seems easier! Any advice on this guys...

 

Spacers and blocks should be avoided at all costs. Blocks are ok, but will ride rough. But spacers can mess things up

 

Could go spindles with 5100s and eibachs up front if trying to keep cost down and keep a good ride or go all out with spindles and some type of off road coilover.. Get new springs in the rear.. All depends on your budget

 

I'm running Maxtrac Spindles with Bilstein 5100 set at 1.75" in the front and then I have a 2.5" AAL and 1.5" block in the rear. I know blocks aren't the best but they are just temporary for now until I save up the money to replace the rear lift But I love the spindles!
And no spacers!