1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Help with A/C control lights

Discussion in 'Technical Chat' started by TacoLayingTheLaw, Dec 3, 2010.

  1. Dec 3, 2010 at 7:00 PM

    TacoLayingTheLaw [OP] New Member

    Dec 3, 2010
    07 4x4 longbed
    3in procomp lift
    I'm new here so i want to start off by saying hi to everyone.

    So this morning i took my dash apart to cover up my tire light since I'm missing my spare tire. After i got everything apart and covered my light with black tape i put it all together and that problem was fixed. Later in the day i noticed my A/C lights on the switches didn't light up. I'm not sure if i didn't plug something in right the a/c button and recirculate one work just not the knobs.

    And my compass stop working yesterday i'm not sure if that has anything to do with it but thought i should mention it.

    Thanks for any help anyone can give me.
  2. Jan 8, 2011 at 9:10 AM

    CorrosiveTendency When up to your nose in shit, keep your mouth shut

    Sep 29, 2010
    First Name:
    Nathan S.
    Schuylkill Co, Pa
    05' DblCab SB Speedway Blue
    OME 885's, Locker Mod. Bilstein 5100's on 4 corners
    The compass has a tendency to stop working due to solder on the circuit board to come loose. I pulled mine apart this morning and found one broke loose, since I don't have a soldering iron, I places a tiny piece of aluminum foil in and fastened with crazy glue. As for as the fan switch/temp selector/ dash vent/AC backlights, I worked on those too, to no avail. Something is loose, because if I tap the switches I can get them to come on till the next bump.

Products Discussed in

To Top