Hey Connecticut, our everything hurts

Love the rig. Good luck with the sale!

 

Beautiful day to scrub the green winter 'gilt' off the porch railings - always easier in the rain.
Maybe pressure wash the evidence of the Tundra's recent incontinence issue off the driveway now the matter is resolved.

 

4runner representing Toyota at today's Enfield mud bog. It made it through

 

Morning everyone. Happy Sunday. And happy Easter for those that celebrate.

 

Good morning all. Happy Easter & Happy Passover.

 

and to the rest - happy dandelion digging day!

 

Good morning, happy Monday

 

Morning everyone. Happy Monday.

Back to the grind.

 

Good Morning CT & just over the borders.
Don't forget to drop your spare tire this weekend....

 

I haven't put mine back on since the last time it got fluid filmed...

 

Just learned today that 4May is Clean Danbury Day. Basically you can get rid of all your bulk crap for free Sat. Morning. I need this.
That's same time as Fluid Film - isn't it?

 

The FF meet was moved to Sunday the 5th. My bad for not saying something. Thought you had seen it from the tittle change on the thread.

 

Good morning all.

I just heard Friday, May 3rd is "CT wide day to bring all of your unwanted junk to @Breakfast Taco house so he can haul it to the dump for free" day...

 

Morning everyone. Happy hump day eve.

 

My Falcon wildpeaks for sale, 400$
Set of 4 maybe 10,000 miles on them,
And I know which are front and rear.

265/70/R16

 

My brother, sister & cousin already did that. Want my house & garage back!

 

Finally figured out my clunking noise. My TC UCA's were making a creaking noise at the bushings. Grease did not help. Otherwise everything was solid. No loose nuts or slack that I could observe by hand shaking. Couldn't get a good video with gopro because I couldn't find a good place to mount with good enough light. So I ordered new UCA bushings and for the hell of it, new uniballs. Installed both last night after returning from vacation (they were delivered while I was away). Much to my amazement, problem solved. Thank god after 3 months of clunking driving me crazy and 3 trips to the shop that couldn't find anything wrong.

 

Then, since my new Fox rear shocks arrived also, I began installing those. Thought it would be quick. One bolt on top and one on the bottom. First I had to press out the bushing in the lower shock eye because it comes with one that has too large of an ID and press in the supplied smaller ID bushing and sleeve. Then both top bolts were so seized up I could not hold the bolt with an allen key so I had to cut them off. Bottom bolt came out fine but the install on the lower mount was a PITA. New bushing was a little too wide making it difficult to squeeze in between the mounting tabs. Also aligning the holes for the bolt with the tight bushing and pressure from the shock trying to extend was almost impossible. I spent a good hour on just that bolt for each side alone. Was very worried about messing up the threads but I did finally get them installed.

All said and done, 6 hours for UCA's and rear shocks. 2x as long as expected.

 

Morning everyone. Happy hump day.

Received 3 of the 4 SEMA wheels yesterday. They all shipped via UPS, each with it's own tracking number, same day, but for some reason 3 got on the delivery truck and 1 didn't. Probably show up today... Hopefully.

 

Possible 3 wheeler! That would be a weird mod