1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

hid help please!!

Discussion in 'Lighting' started by bluetaco99, Jan 27, 2011.

  1. Jan 27, 2011 at 10:25 PM
    #1
    bluetaco99

    bluetaco99 [OP] Well-Known Member

    Joined:
    Jan 26, 2011
    Member:
    #49992
    Messages:
    54
    Gender:
    Male
    First Name:
    michael
    chino ca
    Vehicle:
    06 5lugger
    thank you for your help! so im still learning about hid and how they all work, well two weeks ago i bought a hi/low beam kit thinking it was going to be low and then a brighter high that comes on. well me not knowing anything found out that i should of bought a bi-xenon kit i belive. is there any way i can but just the bi-xenon bulb and plug it in? the kit is a 35w 8000k. thanks for all your help.
     
  2. Jan 27, 2011 at 10:47 PM
    #2
    Rucas

    Rucas 1st gen > 2nd gen

    Joined:
    Dec 5, 2009
    Member:
    #27040
    Messages:
    4,034
    Gender:
    Male
    First Name:
    Lucas
    Northern Colorado
    Vehicle:
    1st gen. 4x4 MANual
    sparkles, fairys, and happy things.
    I think if you were to do that you would need a relay for the bi-xenon.

    where did you get them from?
     
  3. Jan 27, 2011 at 11:09 PM
    #3
    bluetaco99

    bluetaco99 [OP] Well-Known Member

    Joined:
    Jan 26, 2011
    Member:
    #49992
    Messages:
    54
    Gender:
    Male
    First Name:
    michael
    chino ca
    Vehicle:
    06 5lugger
    a audio performance shop. i would like to have both high and low in xenon. not just one or the other with the xenon and then a holigen bulb... and do you know know if the hella 500s will accept a h1 hid light? or do need to buy h3?
     
  4. Jan 28, 2011 at 8:33 AM
    #4
    Rucas

    Rucas 1st gen > 2nd gen

    Joined:
    Dec 5, 2009
    Member:
    #27040
    Messages:
    4,034
    Gender:
    Male
    First Name:
    Lucas
    Northern Colorado
    Vehicle:
    1st gen. 4x4 MANual
    sparkles, fairys, and happy things.
    well i dont think that you would have one in xenon and one in haloged because that requires two bulbs, and you can really only fit one bulb into the housing.
    I would call the shop up and ask them if the kit you bought has high and low beams. If not then they might say you need a relay or something like that.

    Not sure about the hella 500's

    And just something else. I got my kit from DDM tuning, lifetime warranty, and so far they have been flawless. if you want highs and lows, its the H4 hi/lo Kit and will run you only 50 bones.
    http://www.ddmtuning.com/Products/Apexcone-Raptor-HID-Kit
     
To Top