HID Xenon Group Buy Round 5!! Ends 4/5/09

Got mine installed but still gotta do some headlight adjustments. Can't wait til it gets dark so i can really test them out.

 

I got mine, the headlight install wasn't too bad. I figured there would be two plugs, one for each headlight - but only one plug drives 'em both! Now I have the OEM plug on the passenger side just hanging, but I guess that's OK. The real problem I have is the foglights - how are you guys replacing these and where are you putting the ballats? I couldn't even figure out how to get to the headlights, short of crawling around on the ground and monkeying my arm in there...

 

there is one 10mm bolt on both sides that i put the ballast onto. I just crawled under the front and
installed my fogs in less than 15 minutes.

 

got my HID heads & fogs today!!! just wondering if the 2 connectors that are on a black and red wires if you just stick them into the factory headlight plug??? and you just run the ground wire to the neg. post on the battery right?

 

you should not have to connect anything to the battery. those red and black wires plug into the ballast.

 

oh ok...i thought these kits had some ground wires, but i havent looked them over that well yet... but the red and black wires have little metal ends, there not clips like the others in the kit

 

Uhm my kit had 2 grounds and one hot lead that I put straight on the red (positive) side of the battery. They were all perfect 10mm bolt sized, so I grounded them on either side of the truck and put the red to red directly on the battery... maybe this is because I have the bixenons? I don't know, I don't think my fogs had the same setup. I still need to do those!

 

yup I stand corrected. I looked at the shipment I got today (THANKS SLIM)! and my friend ordered bixenons. And they have a different wiring harness then just the single beam ones.

 

ONCE AGAIN, THANKS SLIM FOR THE GREAT GROUP BUY!!!

sorry if I shouted.
​

 

is the opening of the cover suppose to be facing up or down. I:E if its facing down and you look at the headlight from up top you see the silver cover.
Facing up you see the bulb

 

With the non bi xenon version, do you still only hook up one OEM headlight plug? I know with the fogs that both OEM plugs are utilized while with the bi xenons only one is utilized.

 

got mine on today....they're awsome!!

 

whens the next group buy???? i missed this one

 

Facing up to see bulb would be the correct way.

 

Ditto, thanks much

 

Hey Slim you have a few PMs from me. Please let me know because I have to make a decision by tonight.

 

I just installed the headlights late last night........it was sweet!! It was A LOT easier then I thought it would be!! I'm doing the Fog's tonight, hopefully the same?!

 

I sincerely hope that these are NOT the same ones... cuz it looks strikingly similar, for a fraction of the price.

 

Thanks for pissing in all of our lemon aide. I did notice those right after I took delivery of mine. Hopefully ours are better quality.

 

i posted them DDM tuning ones on another thread because i missed out on the GB so are they the same?