How to disconnect passenger seat belt buzzer?

Does anyone know how to disconnect the Tacoma passenger seat belt buzzer which goes off when my dog is in the seat if the belt isn't fastened? Thanks.

 

Someone correct me if I am wrong but If you disconnect the the weight sensor the airbag will still go off if you are in an accident. Under normal operation if unbuckled w/ weight the airbag will get cancelled.

Here's the right way to do it.

Seat belt chime
1. Turn the ignition switch on (without starting car)
2. Press the ODO/TRIP switch until the odometer displays "ODO"
3. Turn the ignition switch off
4. Turn the ignition switch on
5. Press ODO/TRIP switch immediately (within 6 seconds after turning the power switch ON) and hold it down for 10 seconds or more.
6. Continue holding the ODO/TRIP switch and fasten the front drivers's side seat belt.
7. Check that the odometer displays either "b-on" or "b-off" (it will be "b-on")
8. Press the ODO/TRIP button to change the display to "b-off".
9. Turn the ignition switch off.
10. Turn the ignition switch on while depressing the brake pedal.
11. Check that no buzzer sounds when setting on the front passenger seat.