How to install LED and rocker swtich?

Hey, I am new to doing mods etc... I bought a LED rocker swtich and 2 LED modules from oznium yesterday. I want to install the rocker swtich in the blank spaces above the fuse box in my 2006 Tacoma. I have found the fuse box but I am not sure how to wire in the rocker switch, and the add a fuse people have been talking about. What is the best way to do this?

 

The add a fuse is a piece of cake. I got mine at Autozone. Remove the ACC fuse & push in the add a fuse. Install the ACC fuse & one of same size into the add a fuse.

It comes with an insulated splice crimped onto the wire end. Run your wire & crimp there.

Not sure about an LED rocker switch but on a normal SPST rocker.....run the + wire from your lights to 1 connector of the switch. Run another wire from the other connector to your add a fuse.

Connect the - wire of the light to a suitable ground & VOILA!

Hope this helps you out.

 

Earth connects a ground.

Supply connects to constant or accessory.

Load connects to whatever you're trying to turn on.

 

Alkona did you ever figure this out? You never PM'd me back

 

http://www.classictruckshop.com/clubs/earlyburbs/projects/bosch/relay.htm
Here is a relevant link to wiring for you. I forgot to post it earlier.