I found the best way to install the front sway bar!!

In the trash.

 

have fun turning onto an on-ramp over 5mph

why put a quick disconnect
a pin that you pull?
Too much work

 

I drive my truck like a race car, no sway bar

 

you seriously have a hard time turning on to an on-ramp? I could tell the difference in body roll when I removed mine, but that sounds dramatic. The off road benefits serious out weigh anything in favor of keeping it.

 

Ok boomer.

 

lol, nice, Kramer.

 

Actual picture of me going 6mph with the sway bar removed on the off ramp yesterday.

 

Ahahahaha

 

race cars have sway bars

 

The truck unquestionably handles better with the sway bar on. This is fact, not opinion. If you're ok with the increased roll and diminished handling, rock on.

However, many of us run without a sway bar because it's simply a pain to get on and off quickly before and after an offroad play day. I'm one of them. If there was a proper sway disconnect made for our trucks I'd own it. Ultimately, if you just drive more carefully you'll be fine. But the handling with the sway bar on is sooooooo much better.

 

Because you can't without destroying cv boots. My 3rd gen 4runner has disconnects.