1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Idaho BS thread in the PNW

Discussion in 'North West' started by Jensonbt, Aug 28, 2011.

  1. Feb 12, 2013 at 9:42 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,621
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.

    sorta..

    thats why its called a console. Its automated. My Digi 003 is too :D but its only 8 faders.

    a sound board for live isn't automated, well..some are now, so its not a console.

    And every board is just a rerouting tool.

    You have your main inputs, Direct outs, Line ins, FXsends and returns, aux outs and sends, Group outs and sends, Matrix outs and sends and the nice ones like that SSL have built in busses too for more routing to like FX. then there are VCA sliders too.

    The EQs and built in compressors and limiters in the console are what are really good usually. Plus the Mic pres. But you can always patch to outboard gear which is the real killer stuff usually. Then the console master bus output add its own character to it.

    they are awesome.

    Plus unlike mine where you have to "page" over the channel strips, you just have all 42 or more right there. Much easier to mix.

    But i just have a mini setup like that. Wish i could afford outboard gear but your think truck stuff is expensive :eek:
     
  2. Feb 12, 2013 at 9:44 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,621
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.

    please see above post :D haha
     
  3. Feb 12, 2013 at 9:45 PM
    Konaborne

    Konaborne Pineapples on pizza Hawaiian does not it make.

    Joined:
    Nov 21, 2010
    Member:
    #46536
    Messages:
    31,902
    Gender:
    Male
    First Name:
    Cody
    Kealakekua, Hawaii
    Vehicle:
    Lifted 00 TRD Off-Road
    fox extended travel remote resivoir coilovers, 14" eibach 600lb coils, All Pro tubular chromoly 1" uniball upper control arms, All Pro expedition leaf packs, 10" bilstein 5150 piggyback reservoir shocks 265/75r16 Goodyear wrangler MT/R kevlars wrapped around 16" Helo 791 gloss black, Mini H1 retrofits with 6000k bulbs, 18" magnaflow w/custom exhaust reroute various decals, Sockmonkey retro hood stripes
    yes. I grabbed some recording stuff for home use

    holy fucking shit.
     
  4. Feb 12, 2013 at 9:46 PM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,537
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    and the incoherent rambling goes on!

    Please, allow me to go into the procedures of rigging the main sheet and jib sail to the 4:1 block for your entertainment :D
     
  5. Feb 12, 2013 at 9:47 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,621
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.

    holy what??

    yea i have a nice setup for ITB mixing. And a nice mice and mic pre. Need a compressor and some more mics and id love a couple more mic pre's.

    really id like to upgrade to ProTools HD native though..
     
  6. Feb 12, 2013 at 9:48 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,621
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    :laugh:


    hey..i warned you all once not to get me started on audio..:D

    i love it

    its like physics and Brady :p haha
     
  7. Feb 12, 2013 at 9:50 PM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,537
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    OR you can review job costing for a manufacturing company with me! Wanna prepare some schedule of cost of goods manufactured?

    also had a little practice quiz in jazz today....scored a 6 out of 13....fuck that class is going to suck.
     
  8. Feb 12, 2013 at 9:54 PM
    Konaborne

    Konaborne Pineapples on pizza Hawaiian does not it make.

    Joined:
    Nov 21, 2010
    Member:
    #46536
    Messages:
    31,902
    Gender:
    Male
    First Name:
    Cody
    Kealakekua, Hawaii
    Vehicle:
    Lifted 00 TRD Off-Road
    fox extended travel remote resivoir coilovers, 14" eibach 600lb coils, All Pro tubular chromoly 1" uniball upper control arms, All Pro expedition leaf packs, 10" bilstein 5150 piggyback reservoir shocks 265/75r16 Goodyear wrangler MT/R kevlars wrapped around 16" Helo 791 gloss black, Mini H1 retrofits with 6000k bulbs, 18" magnaflow w/custom exhaust reroute various decals, Sockmonkey retro hood stripes
    fuck all that shit

    I'm working on oxidation states causing oxidation/reduction of reactants, and the creation of precipitates in reaction
     
  9. Feb 12, 2013 at 9:54 PM
    mizzac

    mizzac Well-Known Member

    Joined:
    Oct 22, 2010
    Member:
    #45067
    Messages:
    6,397
    Gender:
    Male
    First Name:
    Mac
    Montana/CO
    Vehicle:
    Yota-less
    Stickers
    That one is a picture of the back side of an elite that I found... the two bolts on the bottom mount to the bottom and then the ones on the front. Then just build the main center mount from there.

    After that set your wing pieces on the side bolts and set your front plates up to match and play with the angles until your happy.
     
  10. Feb 12, 2013 at 9:59 PM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,537
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    I still have 2 weird ass shaped half boxes and some weird ass shaped pieces with 3 holes in them...that i dont have a clue where they go lol. I just have to find time to call cbi lol.
     
  11. Feb 12, 2013 at 10:02 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,621
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    Nope..im going to contiune to work on this lol

    https://soundcloud.com/blackdawg-1/misfits-teaser

    yea how is the jazz thing going? What exactly is it again??

    didn't email you back??
     
  12. Feb 12, 2013 at 10:02 PM
    mizzac

    mizzac Well-Known Member

    Joined:
    Oct 22, 2010
    Member:
    #45067
    Messages:
    6,397
    Gender:
    Male
    First Name:
    Mac
    Montana/CO
    Vehicle:
    Yota-less
    Stickers
    post pics
     
  13. Feb 12, 2013 at 10:03 PM
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    81,621
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    The Trifecta of Taco's
    ALL OF THEM!...Then some more.
    he did..like..10 pages or more back lol

    we talk too much in here.

    in his build too.
     
  14. Feb 12, 2013 at 10:04 PM
    mizzac

    mizzac Well-Known Member

    Joined:
    Oct 22, 2010
    Member:
    #45067
    Messages:
    6,397
    Gender:
    Male
    First Name:
    Mac
    Montana/CO
    Vehicle:
    Yota-less
    Stickers
    i meant of just those pieces lol I dont wanna go digging lol supposed to do hw
     
  15. Feb 12, 2013 at 10:07 PM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,537
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    no they did. but they dont have actual instructions for the taco bumper since its not actually a DIY kit...they sent 4r instructions...but the pieces im stuck on that are different on the taco bumper also happen to be the pieces that dont exist on the 4r bumepr. in the email they said if you have any install questions just to call them so you arent wasting time. I have to just tell them to email me a pic of the inside of a taco bumper
     
  16. Feb 12, 2013 at 10:08 PM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,537
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    here ya go mac

    from my build

    So with zero instructions except the external pics on CBI's website I pretty much figured out how the entire bumper fits together.

    [​IMG]




    [​IMG]


    There are just some pieces that I am stuck on and absolutely cannot figure out where they go (im going to email cbi, dont worry)

    The pieces in the bumper (bottom pic) match the shape of the angles when the two big center pieces are put together (however not quite sure of their location). The 2 smaller pieces on the outside with the 2 holes are for the factory bumper mounting location bolts, and I believe those go to the outside edge of the bumper.

    The pieces below the bumper are the ones I am stuck on. The 2 odd flat triangles I think are just reinforcement pieces once the side sections are welded on...but the odd shaped boxes with one 45 degree angled pieces and those other odd shaped pieces with 3 holes i am just lost on. These last pieces I am stuck on also happen to be the final pieces to complete the center section and mount it to the truck.
     
  17. Feb 12, 2013 at 10:10 PM
    IDtrucks

    IDtrucks Unhinged and Fluid

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    23,537
    Gender:
    Male
    First Name:
    Mark "Buck"
    Jackson Wyoming
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    wait a minute...I think I have the 2 center pieces together wrong....
     
  18. Feb 12, 2013 at 10:10 PM
    mizzac

    mizzac Well-Known Member

    Joined:
    Oct 22, 2010
    Member:
    #45067
    Messages:
    6,397
    Gender:
    Male
    First Name:
    Mac
    Montana/CO
    Vehicle:
    Yota-less
    Stickers
    Hmmm i'll look once i finish my hw more lol
     
  19. Feb 12, 2013 at 10:13 PM
    Konaborne

    Konaborne Pineapples on pizza Hawaiian does not it make.

    Joined:
    Nov 21, 2010
    Member:
    #46536
    Messages:
    31,902
    Gender:
    Male
    First Name:
    Cody
    Kealakekua, Hawaii
    Vehicle:
    Lifted 00 TRD Off-Road
    fox extended travel remote resivoir coilovers, 14" eibach 600lb coils, All Pro tubular chromoly 1" uniball upper control arms, All Pro expedition leaf packs, 10" bilstein 5150 piggyback reservoir shocks 265/75r16 Goodyear wrangler MT/R kevlars wrapped around 16" Helo 791 gloss black, Mini H1 retrofits with 6000k bulbs, 18" magnaflow w/custom exhaust reroute various decals, Sockmonkey retro hood stripes
    it's okay ben, we've all been there
     
  20. Feb 12, 2013 at 10:17 PM
    MapleMoose

    MapleMoose Drunk Canadian

    Joined:
    Feb 15, 2011
    Member:
    #51211
    Messages:
    8,575
    Gender:
    Male
    First Name:
    Ian
    West Kootenays
    Vehicle:
    1996 Tacoma SR5
    3" Eibach Coils, 3" AP Springs, AP 6" Shackles Toytec Diff drop, BAMF Sliders, Deck plate mod,Volt meter, Highbeam mod, PIAA fogs, 18" Magnaflow, LED dash swap, Color matched Satoshi Grille, Custom Rear Plate Bumper
    i was just playing, ill jump back on
     

Products Discussed in

To Top