If you have lifted your truck, do you have vibrations?

A few. But they're all good ones.

http://www.youtube.com/watch?v=-eSN8Cwit_s

 

AP LT in front, 3" in rear. Have developed a very slightvi ration when taking off from a stop. That's it.

 

I do get them at low speeds, but I think it's from my tires...

 

2008 Ac 4X4 , Front set @ 1.75 , TSB plus 1 1/2 toytec AAL . No vibes !

 

ULK @ 3", Dakar leafs, front diff drop, carrier bearing drop, 3 degree axle shims = no vibes for me...so far. 2k miles on the lift.

Justin

 

Your truck looks good! I just ordered 5100s for 4 wheels and a 1.5" AAL. I plan to set the front at 1.75" but I don't have a TSB. Your front looks like you got more than 1.75" of lift. Do you still have a rake with the TSB and 1.5" AAL?

 

Spindles, eibach, and 5100s at .85 for front...all pro plus 3" pack plus 1" angled block for rear...beefed taco 1.5" carrier bearing drop...carrier bearing flip..driveshaft is straight...needless to say, i still have the take off shudder...it bothers the hell out of me when there's a passenger with me...i'm used to it, they're not... "why does your truck vibrate after a stop?" ....it just does ok.

 

I have the billies set at .85 with the Eibach springs and the TSB add a leaf in the rear. I originally had the start off shudder and the vibs between 25-30 and 60-62. I used the Beeftaco's 1.50 cb drop. The start off shudder is gone the vibs are very slight almost unnoticeable. When I do the u-bolt flip I am going to throw a 3 dagree shim in the we will see if that works if not I guess that's what I get for lifting my truck, I can live with it.

 

I have a vibe from 20-25 mph. don't know why its only there. OME 886 upfront, TSB and 1.5 AAL in the rear. Stock TRD off road wheels and tires.

 

I tried it out and it does go away. So you say it is the differenical? What does that mean and is it detrimental to the life of my truck?

 

Quick OT question. Anyone have an issue with your tie rods, I know lots of people do Diff drops but how about a rack drop? To get your tie rods back in spec.

 

I just got the bilsteins in about five minutes ago. Gonna have to figure out a way to move the circlip up to the 1.75 level. Going to get them put on next week. I hope all goes well.

 

The number of responses has me worried that have vibrations.

 

One way to find out. Just like the rest of us.

 

yep. Maybe you will be one of the 2/3........ I was the 1/3.......

 

I voted yes because I had the front diff vibe. Installed the ECGS bushing and all is good. This is with OME 883's in front giving ~1.5+" of lift.

 

You should read through this thread.

http://www.tacomaworld.com/forum/2n...nt-differential-bearing-vibration-thread.html

 

I have vibes as well. However they are very minor. I have the Toytec ult kit. 3 inch up front and a 2 inch aal in the rear. The vibes are only at about 15-25 mph. The rest of the time it is fine. I also ordered the beefed taco carrier drop bracket. I am still waiting to get it. From what I have read it is worth it. I was very concerned about vibes before I lifted the truck but it is really a very very small issue now that I actually did the lift.

 

I only plan on doing the bilsteins set at 1.75 up front with the rear tsb, that's all. I have quite a rake going on and I need to level it out. I sure hope all will be good and no vibes.