1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

intake manifold

Discussion in '1st Gen. Tacomas' started by Hambone155, Jan 15, 2012.

  1. Hambone155

    Hambone155 [OP] Well-Known Member

    Joined:
    Jul 9, 2008
    Member:
    #7844
    Messages:
    709
    Gender:
    Male
    omaha
    Vehicle:
    Causing Butthurt is my job
    port and polish intake manifold, supercharger, pulley for charger, lifted, tires, deckplate, (doing full engine build)
    i have the trd supercharger on my truck today i removed the boost port of the back side of the supercharger because i knew if was getting bad air. just mad vac leak.

    i re sealed, in the process i noticed that the cam vent on the driver side bank was out. put that back in, checked all of the vac lines. everything is hooked up.

    its tossing rich/lean coeds left and right.

    when im driving i cant let it boost at all because the boost is falling out somewhere. if it boosts it starts to shake sputter and die out on me.
    its not hard to not make boost but its bugging the fuck out of me.

    has anyone had this problem and if so tips?
    any input would be nice because next im ripping the intake off. thats the only other option i have.
    all sparks all injectors work. and its only under boost. replaced fuel filter.
    and its got right air/fuel ratios.

    ???? please just confirm that its the intake mani. thanks guys/gals
     
  2. Hambone155

    Hambone155 [OP] Well-Known Member

    Joined:
    Jul 9, 2008
    Member:
    #7844
    Messages:
    709
    Gender:
    Male
    omaha
    Vehicle:
    Causing Butthurt is my job
    port and polish intake manifold, supercharger, pulley for charger, lifted, tires, deckplate, (doing full engine build)
    bump, anyone?
     
To Top