IronRyno Fabrication South Bay Area (SOCAL) : Rock sliders, CMC’s, Suspension Installs, etc…

Had my 2015 DCSB TRD worked on by Ryan yesterday.
1. Full suspension install (Kit purchased at Headstrong (Good Service - I will definitely be a repeat customer)):
- Bilstein 5100 front/rear shock
*Front 2887 springs for coil over
- Headstrong 3leaf AAL
- SPC UCA’s
- Carrier Bearing drop kit

2. Ryan’s famous ‘what cab mount chop?’ CMC. I can barely tell any work was done! Looks factory! He computer plasma cuts the plates, welding is impeccable. Covers and paints the work done.

I would highly recommend Ryan for your truck work! I will definitely be contacting him again for any future work. if you are looking for install or CMC - don’t hesitate to contact Ryan.

here is the truck w/ FN wheels picked up today from Dustin (another great dude to work with!!!!!!!), 295/75r16 Nitto Ridge Grapplers purchased and installed @ Americas Tire (they price matched a current Amazon price which was 25$ cheaper) - they did a good job as well! Not a single scratch on the rims, they followed FNs directions on installing the lug nuts (no impact tool use) installed the caps correctly etc.. I will be going back there again).

 

Man!! Thanks so much for the kind words and for the awesome review. I really appreciate it. It was awesome meeting you and hanging out for the day. Thanks so much for your support and I’m here if you need anything else man!!

 

Built and installed a set of sliders for another customer today. 3rd gen DCLB

 

Glad to see you got a shade out there now! No more crawling under the truck in the blistering sun

 

Hahaha! The canopy is awesome in the summer lol!!

 

@Mista_G came through for his Tundra sliders today. Thanks buddy for your support and glad our kids got to play and hang out together while I was installing them!

 

Hit up ya boy if anyone needs anything

ROCK SLIDERS
SUSPENSION
CAB MOUNT CHOPS
VIPER CUTS
ETC…

 

Bump

 

Doing 5th gen Bolt on 4Runner Rock Sliders now if anyone needs a set.

 

WHO needs a CAB MOUNT CHOP?

I have 7 sets of plates cut out for CMC’s. Ready to go. Hit me up

 

Had a busy Saturday. First customer Cab Mount Chop and 2nd was a Cab mount chop and installed some rock sliders I built him

 

Made the trek today to @Shmellmopwho. I'm running my 6112s on clip 7/9 and was rubbing bad with 285s and 4.5 backspace. Now I'm a happy camper and made my first u turn without cringing. He does good clean work and takes pride in his work. That seems hard to come by these days. Can't recommend him enough.

 

You doing anything for 4th gens? I'll be ordering sliders and skids for my wife's 2009 soon.

 

Thanks so much dude! It was awesome getting to meet you today and chat for a bit. Thanks so much for your support and I’m super stoked we were able to take care of the rubbing! Glad it’s all good now! I really appreciate the kind words. It means a lot to me!

 

If I can find a 4th gen nearby to take measurements off of, I’d be happy to build sliders for you guys!!

 

If you send me a drawing with the measurements from the 5th gen set you built I can compare it to my 4th gen's frame. I want to say that's going to be pretty damn close. Worst case I drive down there for a weekend and we use my wife's 4Runner as the prototype.

 

I will try to see if I can get you the drawing. If not, super happy to have you down here. You can plan a beach weekend and we can take some measurements haha

 

Big day today for a customer. Full suspension install, CMC, and Viper cut front bumper.

ICON 2.5 COILOVERS 650lbs springs
ICON Delta joint UCA’s
ICON RXT leaf’s
ICON 2.0 rear shocks with resi’s

 

Worked on a couple trucks yesterday. First was full suspension install on a FJ Cruiser and second was installing a set of sliders I built for a brand new 4runner

 

Set of 2.5 Gen Tundra sliders I finished up today. Customer came down from Canada! Planned a Disneyland trip with his wife and kids to come get the sliders haha. Install on Wednesday