1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Jackery 1500 Pro inverter

Discussion in '3rd Gen. Tacomas (2016-2023)' started by Agem_89, Feb 20, 2023.

  1. Feb 20, 2023 at 3:50 PM
    #1
    Agem_89

    Agem_89 [OP] Well-Known Member

    Joined:
    Feb 11, 2019
    Member:
    #282683
    Messages:
    155
    Gender:
    Male
    First Name:
    Andrew
    Frederick, MD
    Vehicle:
    2019 Cement TRD OR 6MT DCSB
    ****OME 90021**** ****888 springs**** **Dakar HD Leaf** Victory roof rack Rear seat delete CMC
    Incase anyone is searching for information, the jackery 1500 pro will not charge from the inverter in the bed.

    I did some searching around for information, wasn’t 100% clear. Some said it won’t charge because the OEM inverter isn’t pure sine wave. I read other comments online saying jackery would charge in the bed.

    when plugged into household power it pulls ~490 watts so I didn’t have high hopes for the little inverter.(nor do I intend to use it this way) I also know using the inverter is wasteful (dc to ac to dc) but could be more convenient. Running 4/6ga wire to the back vs using the factory inverter wiring for the same capacity.

    Hope this is helpful to somebody.
     

Products Discussed in

To Top