Just installed King Coilovers and Total Racing UCA

So how high can I lift my 2011 4 x 4 sport with my king's and TR UCA's. The shop turned them 7 rotations from the factory set up is that to high?

 

Aren't they ahipped out preloaded to 2.5" of lift?

 

you should be around 38" tall from the ground to the upper most of the fender up front. Thats 3" (ish)

 

I'm not sure?

 

I know a lot of places ship out with preload and 7 turns from shock to shock runs different so maybe someone with kings will chime in also Ho out and measure like Scott mentioned

 

I just check and to the top of the bumper is 38".

 

Any pics post install?

 

To the fender is 39.5"

 

Not sure on the model or spring rate but they cost $1400.

 

You spent $1400 on something you had no idea of the specs of?

And I thought I spent freely

 

Kings are kings , they don't have extended or regular travel its just one product

 

I told the shop i wanted the best king had to offer for the front had to get rid of the spacer lift.

 

Hopefully u got the 2.5 with a resevior. as far as the pre load, if u have very much more than 3', the frontend will start bouncing as if u had hydraulics and become very hard to steer.

 

http://www.tacomaworld.com/gallery/showphoto.php/photo/152250/size/big/cat/500

Here is the picture.

 

600# it is....

 

Ir was a general comment as he said he knew nothing about it except they were 1400. If aomeone buys its just like off the site 1400 without telling specs or anything then they are the same. And there arent different "part numbers" for the coilovers just a different number for parts of the kit, not as a whole.