Keystone State Thread

Any good auto shop should be able to nudge them back where they belong and weld them better. If not PM me and we can figure out something. The TC kit will take some time to do.

 

Welding the TC cam tabs together is not a hard job... welding them on the truck... not hard either but time consuming... you have to take off the LCA grind off the cam tabs and then weld them on perfectly in place... ive witnessed and assisted 1 install of them...

If stairgod can't do it I can assist you...

As long as your alignment adjustment bolts are torqued to factory spec which is 100 ftlbs they should not move cam tab or not...

Could just run a bead on the outside of the tabs that would probably work...

 

If you ever need any help in the Fabrication or welding end even if it is only some ideas feel free .to ask

Scary to say but I have been doing it for 40 years

 

Just broke off the grease fitting on my LR upper control arm does anyone know the size that it takes ?

 

The zerk? Zerks are a standard size pretty much...

 

That's what I was wondering thanks

 

Yeah they are all the same... too bad you aren't near Philly could swing by the yard and I could just give you what you need. Got a butt load of them

 

I'm sure the garage at work has them it'll be fixed up in the morning. I'm just amazed it broke hell this is the first greasing since swapped in the new arms

 

There are a few sizes of zerks.

 

But the sizes are a noticable difference. Not like a tricky thing lol

 

Fixed

 

Finally dented my driveshaft, have Quigley driveshafts nearby in York pa. Any idea what thickness to retube to that will still balance decently? I know nothing about this stuff and figured I'd put out a feeler for basic info before giving them a call.

 

I did mine a year and a half ago. TC weld on are nice, and a permanent solution.

I won't have much free time until next year, but would be happy to weld a set on for you.

 

Drive shaft wall thickness is never all that thick

Just remember it is tube not pipe

Then the high horse power ones don`t have the vehicle dropped on them with rocks underneath

 

anyone around here have a cheap grill for a second gen (pre facelift). looking to possibly get one to do my satoshi on so that i don't have to lose my other while doing the grill mod.
if ya hear of anything let me know!
Thanks!
-Sam

 

Hello my Pennsylvania neighbors. I'm always up for meet @Blackout14 Im not ready to wheel yet too much to get done on me taco. Meet ups and food is always good

 

I have one in my closet from my '08 TRD OR actually. It has a chrome surround, but you could swap it in while you do the satoshi on your color matched one.

Shoot me a PM if you want.

 

thats what i was looking for. something i could dismantle then "pop" into my existing surround

 

Anyone have an awesome local stout that I should try? Darker the better!

 

I've been trying to get out to the victory brewing company. Their restaurant has some good wings. Been a couple years since I've been back there