Keystone State Thread

You said sagging.

 

Yep, let's encourage @Braves95 to buy more gear.

 

I noticed his tires looked aired down with all of that weight.

 

Yeah, I hope he can get it fixed swiftly

 

Those hidden winch bumpers are beautiful IMO.

 

what are the coils rated at?

 

Pretty sure they are 700#

 

ok. cool. i totally made the mistake of not checking, had to take my fox off, and swap the 600# for 700#.

 

Anyone near PGH have access to Techstream or the ability to program TPMS sensors?

 

@Braves95 get a go-pro and some zip ties. Attach it to the bottom of the truck so you can see the suspension and drive. Then see if you can see a vibration in that corner. Repeat for all four.

You can borrow my fake-pro if you want.

Also read this: https://www.tacomaworld.com/threads/drive-shaft-vibrations-solved-step-by-step.244535/

 

Sorry git it fixed about a hour a go.

It was the free grill. Removed it and all of it went away.

 

That's a hell of a trouble shoot....

 

I called Toyota and they said there is no seal on the inner side of the bearing. Only on the outside??? If you look at the diagram it appears the seal(4) is on the outside? https://parts.conicellitoyotaofcons...le-cat/rear-axle-scat/?part_number=4245004010 unless I need (5) there has to be a inner seal or something for me to find a spring from a lip seal inside the diff. Right? If the seal is on the out side how do you go about getting a new one on?

 

according to diagram,you are correct.when you say you founda spring,you are referring to a rounf spring that would go on the outer lip of axle seal,right? maybe 2inches around?

 

This would be the spring from the rear diff.

 

Certainly looks like it's from seal.

 

^^^^^^^^^^^^THIS^^^^^^^^^^^^^

 

Agreed but the diagram didn't show a seal on the inside. I'm not sure what I need to replace. I may just say fuck it till after TN.

 

Unfortunately that does not look like it is the right size for either a bearing/tube seal or pinion seal. So where did it come from??