1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

King Coilovers Tacoma Gen 1

Discussion in 'Suspension' started by Downsouth Motorsports, Apr 11, 2010.

  1. Apr 11, 2010 at 8:07 AM
    Downsouth Motorsports

    Downsouth Motorsports [OP] Downsouth Motorsport Vendor

    Nov 28, 2008
    Mission Valley, San Diego
    Front King 2.5, Coilovers, Camburg UCA, Rear King 2.0 Shocks, Lots of Tinted Windows, Cherry Third Owner
    Good Morning,

    I have been getting a few questions lately about the King coilovers for the Gen 1 Tacoma's...1995.5 to 2004 4wd and 2wd (6 Lug)
    I have just posted a picture in the news section of the DSM Site:



    This is our 1996 Tacoma 4x4 with a 4 cly. and I drive it daily as our work vehicle.Here is a list of the mods.

    King Coilovers Front set at the factory setting from King and it is about 2.25" -2.50" of ride height change.

    Rear 5125 Series Bilsteins 8" and 8.5" Travel with the correct bushings installed and bolted into the stock locations..No lift in the rear...She is stock..

    Tires & Wheels: Factory 15 x 7 Tacoma wheels powder coated Asphalt Black and caps painted to match. Tires are BFG AT's 33 x 10.50 x 15
    and no Rubbing....

    Hope this helps and here is the link to the coilovers on our site for the techy stuff:


    And of course forum members will need to contact us for discounts...

    Enjoy the rest of your weekend...
    Thank you,

Products Discussed in

To Top