LCA Cam Bolt

I put new control arms on my truck
No big deal right. The right side is all good. The left is halfway good. The bolt at the front(closer to front of truck) is not tightening for some reason. I tightened it to spec and the bolt/cam/nut is still able to move by hand. Yet the nut is tightened to the bolt at 100 foot lbs. I’m stumped. I was gonna get a new bolt tomorrow from Toyota to see if that fixes it. If anyone has anything i appreciate it.

 

Remember to chock your wheels and torque with the truck at ride height, wheels on the ground. Cheers!

 

Doesnt make any sense, do you have hardware mismatched? Maybe share a couple of photos to help out.

 

I’ll send picture and video tomorrow. And that’s what I did was torque when vehicle is down. Still no luck