1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

LED bulb conversion

Discussion in 'Towing' started by thor95, Nov 17, 2017.

  1. Nov 17, 2017 at 4:05 PM
    #1
    thor95

    thor95 [OP] New Member

    Joined:
    Mar 19, 2016
    Member:
    #181757
    Messages:
    4
    I have a 2008 4WD with the towing kit and I'm investigating a LED bulb conversion for the tail lights.
    It appears I would need to splice in a Load Resistor on each side for the turn signal part, but I'm wondering if the tow harness is wired in parallel with the tail lights then all trailers I tow would also need to have LED tail lights as well.
    I generally only tow one trailer so swapping out those bulbs to match isn't a big deal but I also don't want to limit myself from towing any other trailer with normal 1157 incandescent bulbs.
    Anyone run in to this already?
     

Products Discussed in

To Top