Led fog light help

Hi, I am trying to see if its possible to swap out the bulbs in my 2022 tacoma trd off-road for some yellow bulbs but I can't seem to figure out how to remove the existing bulbs from the stock housing. I unplugged the cable but the socket does not twist. Am I doing something wrong or are the lights non-removeable? Appreciate any help or advice.
Note: The stock lens housing part# is PT857-42192.

 

welcome

the h16 is accessible (not that I know how) but they are not very good units overall

the fog light review thread
https://www.tacomaworld.com/threads/the-led-sae-j583-fog-pod-fog-light-review.554813/

 

Welcome to the forum. That part number is a fully integrated LED unit. There are not bulbs to remove or change in LED assemblies, the entire assembly is sealed and non-serviceable. You must swap out the entire assembly. I'd look at the Diode Dynamics Elite in yellow as a direct replacement that is higher performing. It is reviewed in the thread posted above.

 

Ahh ok no wonder, thanks for the info!

 

You can get yellow lens covers.

 

its an led not a bulb.....

 

I can vouch for Lamin-x fog covers. Easy to apply, inexpensive and they look great!


.