LED headlights

Are the Phillips H4 led's
A good upgrade from the stock yellow lights...?
Have the Baja design squadron sport fogs and the led DRL's but hate the factory yellow bulbs...
Looking for the very best direct swap and Phillips has always been high quality...
Anyone with experience on these..?

 

https://www.tacomaworld.com/threads/led-lighting-conversion.436865/

 

Your bulbs are H11. You would be better served with an HID kit, LEDs cant compare are far as output goes and in most cases dont provided proper light spread either.

 

HID is too pricy. I was looking for plug and play with a nice nice upgrade over stock.
The link provided for the led thread doesn't seem to cover the Phillips h4.
I know this is a question with multiple opinions but is there a best LED choice...?

 

The philips bulbs are $169.00 a pair. You could do a high quality HID setup for 83 bucks with everything you need.

https://www.ebay.com/ulk/itm/282591853710


https://www.ebay.com/ulk/itm/221763796515

 

Would this be for both high and low beams ..?
That seems great...
Thanks for taking time replying

 

Just the low, for the projectors. With good low beams you will find that you don’t use the high’s as much.

I would do HID lows and Osram Nighbreaker bulbs in the high beams for the best output without doing an actual projector retrofit.

 

We have an H11 LED Kit that would work nicely in your Tacoma. I don't have any pictures of them mounted in a Tacoma, specifically, but you can check out a few customer reviews below for other newer Toyotas using H11 projector headlights:


2017 Lexus ct200H Koito Project H11 LED Kit Review
2017 Toyota 4Runner H11 and 9005 LED Kits Review
2018 Toyota 4Runner H11 LED Kit Review

~Robert

 

Sweet,
Thank you...
I'll look those up now.

 

Thank for your input I greatly appreciate you taking time to help out...

 

These seem like what I'm looking for...
Do I need the canbus or non canbus setup..?
This would be for a 2016 Trd off-road ...

 

I just installed DDM Tuning Saber Pro LED bulbs in my highs and lows last week and they're great so far. 50 watt output so they're as bright if not brighter than HIDs. Be careful with what LED bulbs you get for your low beams, most are quite long and will require you to loosen the entire headlight assembly in order to get the bulb into place. The LED bulbs I used did not.

 

Wrong

 

TRS also says the same on their site but what do they know. Get that message count up.

 

Lol

 

Has anyone used the xenondepot led pro kit in there tacoma ...?
Would love to hear anyone that has what they thought.
Can't seem to find any reviews on a 16 or newer tacoma..
Was thinking of going with there high and low beam kits ...

 

If your looking into LEDs check out this youtube video
https://www.youtube.com/watch?v=SQF5ESBHLrw&index=44&list=PL3kyEje8Np2m02Ofq7_JH4VbExRDwrdEw&t=201s

 

LED’s cannot compare to HID, they are absolutely inferior.

 

V-LEDs is the only way to go!! Not the brightest bulb of the bunch but very nice light distribution and long lasting!

 

No canbus necessary for the Tacoma! The Tacoma uses an h11 Koito projector like the one in these pictures:

STOCK H11 halogen:


Xtreme Pro H11 LED bulb:


Link to full review:

http://www.xenondepot.com/2017-toyota-H11-led-bulb-review-s/106.htm

Steve