LED kits, all orders come with free license plate lights!

Put me down for a set...

 

Didnʻt take any pictures, but with the stock dome light on, light meter read 10 foot candles. Put the LEDs in and reads 30 foot candles from the same spot. The map lights read 10 foot candles with stock bulbs. LEDs jumped up to just around 75 foot candles measuring from the same spot.

Install was simple. Unscrew one screw on each license plate light, push it towards the front of the truck and the whole housing pops out. 1/4 twist removes the bulb fitting, pull out the stock, stick in the LED. May need to adjust the contacts a bit, or switch the bulb 180*, but thatʻs it.

Drivers side of the dome light got a little notch around mid point of the diffuser. Stick a small flathead in there and pop the cover off. On the 2012, itʻll just hang from a piece on the passengers side, not fall off...not sure if this is how every year is. Take out the bulb, pop in the bulb looking adapter and plug in the LED, done.

Used the same little flathead on the map lights, started from the inside edge and popped those off, 4 places IIRC. The real PITA is taking out those bulbs. I used the little flathead and gently pried the bulb loose on the drivers side. Passenger side I just pulled out the reflector...be gentle or itʻll bend and/or rip. Put in the adapter, hook up the lights and done.

Nice and bright in there now .

 

I havent got mine yet..

 

I'm blind!!! Aloha all!...Got my LED's today. Pretty quick!...considering I'm all the way out on a rock in the middle of the Pacific!!! I only had a chance to install the dome...but damn! that sucker is bright!!! I'm still seeing spots! But looks great so far!

One question though...when the light dims on or off...is it normal for it to sort of flicker? It's not really a smooth dimming transition.

Thanks LEDsolutions for the great GB!

 

Yup this is normal for them to flicker a bit.

 

what! you recieved yours before me. I thought alaska mail was faster than Hawaii's service. congrats i am so amped up to install mine when they finally get here.

 

still nothing.....

 

X2

 

this GB has completed.. OP said he will start another one as soon as this GB has received their goods/ 100% complete

see this post:
http://www.tacomaworld.com/forum/gr...free-license-plate-lights-19.html#post4642808

 

The USPS tracking shows that my package was sent on 2/22/12 from San Jose, California. Then on 2/23/12 it shows the package departing from San Jose with no other tracking info after that. I only live a few hundred miles from San Jose so I'm a little worried that it hasn't got here yet. If I don't get it by Friday I'm going to the Post Office to see whats up!

 

Just received mine since it night time already will install tomorrow thanks op for the quick response

 

I wish mine were here...

 

Just got mine, stupid local contract post office did not put a notice in my box for a few days so they were sitting on the shelf in the back. Got them now. Woohoo! When I get back from my weekend trip putting them on Monday or Tuesday.

 

UPDATE!!!

Just installed mine and man Oh man their brite thanks a lot op love them whoever is still waiting patience my friend you will not regret them once installed I promise you

 

I'm beginning to think they are never going to get here

 

I cant figure out how to instal the tag lights on my 11 double cab. Anyone done it yet on a 11?

 

Installed all the interior lights, fairly simple! Thank you OP

 

I haven't done it yet but another posed said to undo the screw and push them toward the front of the truck and they should pop right out

 

My tag LEDs flickered a few times while installing but don't stay on. Moreover they seem loose in the socket. I've adjusted the contact points but nothing works.

 

Take the plate lamp bulbs out and flip them 180 degrees and they should light up. Had to spread the contacts and spin mine around to get them to light up and they work just fine now!