Left flasher went out, flashes once and then none afterwards

Someone told me to @caribe makaira about this issue. But basically I flick the switch down it lights up 1 click and then none afterwards. The right side works just fine. Also hazards work but again only for the right side. if I give it a few seconds it’ll do it again(once flash). So I checked the fuses, bulbs, wiring connections at the end and came to the conclusion that it’s probably the relay, I just don’t know which one to buy, or where to swap it at. Any help is welcomed. Thanks in advance

I don’t have any leds, completely stock

 

Unfortunately the relay is an integral part of the Combination Meter. Not removeable like prior Generations.