Let’s see those with 5100’s with ome 880 or 881 coils

you may not lose anything. I emailed wheeler ‘s off-road and they said 452 bucks for the pair and that’s was assembled.

 

Yea I just looked on there. Not bad. I think imma do the small spacers cause I have them. Then one day upgrade to icon stage 1.

 

Coulda swore I paid between 6 and 700 oh well lol

 

and I’m gonna have them put extended studs on so I can put 1/2” spacer. So 881’s on lowest setting and 1/2” spacer will be nice.

 

Yes, mine are on the lowest setting. Ironically I got more lift than I wanted, probably because my truck's a 4 cylinder regular cab.

 

the 2881’s are only 10mm taller than the 2880’s which is barely over 1/4”. Is that gonna make a difference or should I go 2883’s so they don’t settle so much? 2883’s are .5mm thicker than 2880’s and 2881’s, 10mm longer also and a higher rating in terms of pounds.

 

you have any pictures straight from the side

 

I do not, but it’s about as level as it can be.

 

it looks a little taller in front. That’s what I’m trying to achieve. What suspension are you running in front?

 

what size wheels and tires do you have also?

 

Just the way it’s sitting in that spot really. 5100s with 881 springs and 10mm spacer on both sides. 33 12.50 on 18x9s. Also have 1.5” add a leaf and overloads removed in the rear

 

how come you took the overload out? Doesn’t that lose you ride height? Is that why you added the 1.5” add a leaf?

 

The add a leaf gave it too much lift for me and it was squatting a little too much without it so taking the overloads out put it close to level

 

what add a leaf did you use?

 

I don’t remember, but I think I got it through toytec

 

i think I’m just gonna go kings paired with the deaver 8 spring progressive pack for the rear. That should be a nice combo.

 

Kings are always a great option lol I’ll be getting some whenever I put the 6” on

 

what size tire you running and UCAs? I just installed my 2881's on the lowest clip (says 2" on wheelers site) and they look taller than 2", look more like 3", hoping they sag a bit, on stock UCAs

 

Those are 255/85r16's with SPC UCAs. I was going for 2" of lift, ended up with 2.5", eventually settling to 2.25" after several months. My experience plus what I've heard from a few others is the OME coils provide more lift than advertised on 1st gens.