1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Lets see your custom bumper

Discussion in '1st Gen. Tacomas (1995-2004)' started by fouillard13, Mar 4, 2012.

  1. Mar 4, 2012 at 4:46 PM
    #1
    fouillard13

    fouillard13 [OP] Well-Known Member

    Joined:
    Jan 15, 2009
    Member:
    #12619
    Messages:
    1,140
    Gender:
    Male
    First Name:
    Riley
    Canadia
    Vehicle:
    1998 tacoma 4x4
    Lets see your pictures of your custom bumpers. Arb winch ready shrockworks exc
     
  2. Mar 4, 2012 at 5:04 PM
    #2
    45acp

    45acp Paint me back in Wyoming again...

    Joined:
    Aug 9, 2009
    Member:
    #20861
    Messages:
    6,481
    Gender:
    Male
    First Name:
    Jonathan
    Boring, Wisconsin
    Vehicle:
    bone stock / unmolested 04 2.7L
  3. Mar 4, 2012 at 5:45 PM
    #3
    fouillard13

    fouillard13 [OP] Well-Known Member

    Joined:
    Jan 15, 2009
    Member:
    #12619
    Messages:
    1,140
    Gender:
    Male
    First Name:
    Riley
    Canadia
    Vehicle:
    1998 tacoma 4x4
    thats awesome
     
  4. Mar 4, 2012 at 6:30 PM
    #4
    tacotrd647

    tacotrd647 Resident "dude"

    Joined:
    May 29, 2011
    Member:
    #57421
    Messages:
    604
    Gender:
    Male
    First Name:
    Caleb
    Ridgeway, Iowa
    Vehicle:
    02 Prerunner SR5 TRD
    KMC Enduro Wheels, 265/75/16 toyo open country at2
    Before you hit the new thread button...stop...think...search...
     
  5. Mar 4, 2012 at 7:29 PM
    #5
    alove0750

    alove0750 Well-Known Member

    Joined:
    Mar 30, 2010
    Member:
    #34294
    Messages:
    1,375
    Gender:
    Male
    First Name:
    Adam
    Concord, nc
    Vehicle:
    01 Tacoma Pre-runner
    Bilstein 5100's and OME 882's in the front AAL and Bilstein 5125's in the rear Converted to 4x4, with 97 front diff with manual hubs 4.56 Yukons front and rear Custom front bumper, sliders and under-belly skid by MOBS Fab in Concord,NC with built in hella's and 8000lb smitty
  6. Mar 4, 2012 at 7:31 PM
    #6
    ontarioyota

    ontarioyota Well-Known Member

    Joined:
    Oct 2, 2010
    Member:
    #44122
    Messages:
    524
    Gender:
    Male
    SW Ontario, Canada
    Vehicle:
    01 reg cab 4x4
    Blacked out badges-rims OME lift with 881's & dakar pacs with D6XL AAL, summer tires=BFG 31x10.5x15 on 93 4runner rims,winter= Pirelli Scorpion Ice&Snow on stock steelies,Flowmaster exhaust, deck plate mod
    great pics...subbed
     
  7. Mar 5, 2012 at 1:30 AM
    #7
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    57,002
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    Gee..i wonders who's Elite bumper that is...:spy:

    Check out these vendors man:

    Elite Offroad
    Relentless offroad
    Allpro
    Trail gear
    Addicted
    CBI

    just to name a few.

    I have the Elite offroad front bumper and soon a rear bumper. Tim makes great stuff and i highly recommend him!

    More recant pic of my truck...

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  8. Mar 5, 2012 at 11:04 AM
    #8
    fouillard13

    fouillard13 [OP] Well-Known Member

    Joined:
    Jan 15, 2009
    Member:
    #12619
    Messages:
    1,140
    Gender:
    Male
    First Name:
    Riley
    Canadia
    Vehicle:
    1998 tacoma 4x4
  9. Mar 5, 2012 at 11:04 AM
    #9
    fouillard13

    fouillard13 [OP] Well-Known Member

    Joined:
    Jan 15, 2009
    Member:
    #12619
    Messages:
    1,140
    Gender:
    Male
    First Name:
    Riley
    Canadia
    Vehicle:
    1998 tacoma 4x4
    i like the long but lower stinger
     
  10. Mar 5, 2012 at 11:08 AM
    #10
    fouillard13

    fouillard13 [OP] Well-Known Member

    Joined:
    Jan 15, 2009
    Member:
    #12619
    Messages:
    1,140
    Gender:
    Male
    First Name:
    Riley
    Canadia
    Vehicle:
    1998 tacoma 4x4
    anyone got a winch ready bumper on there yota. would like to see more pics. it almost looks to big
     
  11. Mar 5, 2012 at 3:54 PM
    #11
    01Tac0ma

    01Tac0ma Bash Fabriction & Off-Road

    Joined:
    Jun 11, 2010
    Member:
    #38782
    Messages:
    6,260
    Gender:
    Male
    First Name:
    Chad
    West Columbia, SC
    Vehicle:
    SAS 01 TRD 4x4
    Look at build!
    Damn monty you reckon you'll be lighting up the football fields next season :eek:

    Op I too have the addicted offroad and its set up for a winch as well as the rest that were posted and the holes on the elite bumper serve the purpose of getting to the winch clutch and so forth and once you fill it with a winch it would look pretty good especially with some syn. cable.

    The winch ready bumper you posted i have to agree with you looks really big for this size truck and pricy as hell, elite can make the same bumper blackdawg has without the winch hole in it...

    But here are a few more addicted bumper pics :D
    [​IMG]
    [​IMG]
     
  12. Mar 5, 2012 at 3:55 PM
    #12
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    57,002
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,

    i have seen a ford and dodge with those bumpers..they stick out way to far forward IMO.

    and the two outside holes are for fog lights, i just bought some. The middle ones are so you can have easy acess to bolting on lights to the top of the bumper and the slots are for a winch.
     
  13. Mar 5, 2012 at 3:56 PM
    #13
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    57,002
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,

    yep prolly :devil: lol
     
  14. Mar 5, 2012 at 4:08 PM
    #14
    yotabeast505

    yotabeast505 The Beast

    Joined:
    Feb 15, 2010
    Member:
    #31432
    Messages:
    1,146
    Gender:
    Male
    First Name:
    David
    NE Hights ABQ NM
    Vehicle:
    THE BEAST
    here we go. Ford 9" rear after breaking 5 sets of gears in the stock yota 8.8, 5.13 gears with a detroit hard locker, 63" chevy leafs and custom hangers, sky's front spring hanger with sky's extream hysteer and PSC hydro assist ram and PSC pump. welded front spyders in the f-550 front dana 60 with warn hubs, pico brake lines and hoses, elecrtic fan, TRD supercharger with URD 2.1 Pully, URD Map-ECU2 and cage built by me. wide band a/f by inovations, lots and lots more...........
  15. Mar 5, 2012 at 6:23 PM
    #15
    fouillard13

    fouillard13 [OP] Well-Known Member

    Joined:
    Jan 15, 2009
    Member:
    #12619
    Messages:
    1,140
    Gender:
    Male
    First Name:
    Riley
    Canadia
    Vehicle:
    1998 tacoma 4x4

    I agree they do look to big and stick out. I really like yours. I am going to go that style but a little different.
     
  16. Mar 5, 2012 at 9:40 PM
    #16
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    57,002
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,

    Just contact Tim man! He will be more then happy to make any adjustments to your liking!
     
  17. Mar 6, 2012 at 12:21 AM
    #17
    Timicha

    Timicha Timicha

    Joined:
    Dec 23, 2008
    Member:
    #11854
    Messages:
    2,722
    Gender:
    Male
    First Name:
    TIM
    Tillamook / Portland , Oregon
    Vehicle:
    04 White Tacoma
    Fabtech 4 inch lift, tinted windows, diff drop, 33 inch MTZ tires on Raceline Raptor wheels, ELITE OFF-ROAD bumpers and sliders
    here yu go, no holes

    [​IMG]

    [​IMG]
     
  18. Mar 6, 2012 at 12:24 AM
    #18
    Blackdawg

    Blackdawg Dr. Frankenstein

    Joined:
    Dec 31, 2010
    Member:
    #48500
    Messages:
    57,002
    Gender:
    Male
    First Name:
    Monte
    Wyoming/St. Louis
    Vehicle:
    96.5 FrankenTaco & 03 Stock dbl cab
    BFG KM2 33x12.5 tires, Wheelers Type B rims, Allpro 1.5'' Wheel spacers w/extended thread lug nuts 2 Alpine 10'' Type Xs 2 Kicker 6X9s 4 Sony 5 1/4s Pioneer 4100 HU Sway bar removed 4 Hella 500 HIDs Frankenstein Leaf packs 1'' lift shackles Eibach coils 5100s front 10'' 5150s rear BAMF BPV bracket Deckplate mod Elite Front bumper Magnaflow 14'' muffler Elite Off Road Rear bumper with Tire gate with jerry can and fold down table, BAMF sliders, Custom Homemade Bed, rack/roof rack, CVT Mt. Shasta Roof Top Tent, 20lb CO2 tank, BAMF diff skid custom front skid, GM CS144 140 amp alternator Blitzpro 21s HAWK side LEDs Blitzpro Custom made side mirror lights, LightForce 240 Blitz llights, Piaa 510 ION fogs, XRC8 Winch w/in cab controls,
    And there ya go man! :D

    Told ya..he will make anything ya want :cool:
     
  19. Mar 6, 2012 at 10:15 AM
    #19
    96Taco

    96Taco Well-Known Member

    Joined:
    Jan 6, 2011
    Member:
    #48827
    Messages:
    763
    Gender:
    Male
    Alberta
    Vehicle:
    '04 V8 4Runner
    ..stay tuned
    [​IMG][​IMG]

    [​IMG]

    And one you can partially see the bumper :p

    [​IMG]
     
  20. Mar 6, 2012 at 10:34 AM
    #20
    RelentlessFab

    RelentlessFab Tacoma offroad armor fabricating beast Vendor

    Joined:
    Feb 17, 2008
    Member:
    #4772
    Messages:
    14,185
    Gender:
    Male
    First Name:
    Eric
    Eastern side of the Sierras: Sparks, NV
    Vehicle:
    07 SR5 4x4> 03 SR5 4x4 total> 14 Crewmax TRD
    Had tons on the old Taco's.... new Tundra is pretty stock
    Here's my 1st gen bumper w/ fog cutouts and top tube. I can mod however you want.
    [​IMG]
    [​IMG]
    [​IMG]
     
To Top