LF round flush mount 4 bumper

hey guys so I supposed to be getting my plate bumper in the near future and I wanted to have everything ready to go so when I pick it up I can install it one time and enjoy.

So here’s the deal, I went through a bit of trouble on my first gen changing the front end to leds and switch backs in the turn signal and side marker. I really want to take my led switch backs out of my stock turn signal housing and put it into a round light that is mounted flush with the bumper. The holes are either 3 or 4 inch In diameter. Normally people put fogs in these holes but I have enough lumens as it is.
So here’s my question.
Does anyone know where I can get a light housing that will flush mount to my bumper? I’m sure I’ll have to modify the back of it to mate with my factory socket but here’s the kicker. The switch back led bulb is quite tall which requires the light housing I need to have some depth. I’m assuming atleast 2 1/2 inches from socket to end of the bulb.
If anyone has a line on what I’m looking for I would appreciate it. I really don’t want to go to uhaul or get some ghetto looking trailer light since I spent so much on this bumper I don’t wana look like an Autozone special lol.
Anyways I added some pictures of kind of what I’m looking for but don’t quite make the cut. Any help would be appreciated! Thanks guys

 

i think this might work, if anyone knows of anything else let me know id like to see if i can find anything cooler before i buy these
edit: just looked at the dimensions its probably going to be too big. the hunt continues