1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Lift and tires, advise...

Discussion in 'Suspension' started by cctaco, Nov 11, 2009.

  1. Nov 11, 2009 at 12:19 PM
    #1
    cctaco

    cctaco [OP] New Member

    Joined:
    Oct 23, 2009
    Member:
    #24769
    Messages:
    1
    Gender:
    Male
    New to TW and looking to spend some money.

    I've done my research and I have some questions to clear up. And looking for a little advise.

    On an 06 TRD I would like to run
    Toytec Ultimate Lift
    LR UCA's
    285/70/R17 BFG A/T on stock rims.

    Searching on the forum I have heard different advise on the following questions. Just looking for a little clarification.

    Do I need wheel spacers? In the front only?
    Would I be better off with 265/70/R17 (if so are the UCA's necessary, im assuming I still need those for alignment?)

    Any advise is appreciated.
    Thanks for the help!
     
  2. Nov 11, 2009 at 12:22 PM
    #2
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,518
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    Welcome to TW!
     
  3. Nov 11, 2009 at 12:30 PM
    #3
    CAMZTRD

    CAMZTRD Well-Known Member

    Joined:
    Jun 19, 2008
    Member:
    #7401
    Messages:
    512
    Gender:
    Male
    First Name:
    steve
    hampton, va
    Vehicle:
    2006 DC TRD Off-Road 4x4
    billy 5100's @ 2.5 w/ 1/4 spacers, toytec aal, LR UCA's, revotec headlights,revotec taillights, lamin-x fogs, color matched grille and rear bumper, undercover, bed-extender, black nerf bars, scan gaugeII , afe drop in, 50 series flowmaster, 6000k bi-xenon hids, more to come.......
    yes you need spacers if your going to use stock wheels with the 285's you could get away with spacer in the front only, but IMO it would look better to have them all the way around...and UCA's are for correcting alignment.
     

Products Discussed in

To Top