Lift shopping list, what am I missing?

hey guys, I’m ready to start ordering. Hoping you can let me know if I’m missing anything.

The plan:

6112/5160
Headstrong leaf pack, leave overload in
ECGS bushing
JBA UCA’s (I think just the standard version?)

Planning on 2” front and rear. As I sit now, I have around 3/4” rake which is fine to me.

The questions are:

Is the 5160 ok with 2” of lift in the rear?

Are most folks finding they need angled wedges for the rear with 2” of lift, or is this something where I need to install the lift and measure my pinion/drive shaft angle and then order?

I don’t need max droop, but will the brake lines need to be extended at 2”?

I think that’s it. Any advice is greatly appreciated. Now if I can just find someone with a set of 6112’s on the shelf.

 

You might experience driveline vibes, but you wont know until you install the lift. I’d wait and see if you do, and go from there. The issue can be solved with shims on the leaf pack or with the carrier bearing spacer. You’ll want the standard JBA’s, I have them and I love them. Other than that, you seem to be set!